[Sat Sep  1 05:37:45 2012] Detection parameters:
  Position = (302.1, 288.8) = 5 32 52.58 -37 0 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.1 +/- 14.6
  Background counts = 11.2
  Rate = 0.009 +/- 0.001

[Sat Sep  1 05:37:46 2012] Off-axis axis estimate = 0.75'
[Sat Sep  1 06:46:44 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 06:46:44 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Sat Sep  1 06:46:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Sat Sep  1 06:46:44 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.80"
[Sat Sep  1 07:36:37 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src5.ximg exists
[Sat Sep  1 07:36:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src5.csv
[Sat Sep  1 07:36:37 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Sep  1 07:36:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src5.csv
[Sat Sep  1 07:36:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 07:36:37 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Sep  1 07:36:37 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Sep  1 07:36:37 2012] Fit fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Sep  1 07:36:48 2012] Spatial fit model total counts = 685.731000, observed total counts = 685.000000
[Sat Sep  1 07:36:48 2012] Offset between fit and detection position for source 7 = 6.166943 pixels
[Sat Sep  1 07:36:48 2012] 666.637000 total counts/ 494.616000 bgd. counts: snr = 7.734770
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 6.166943 pixels
  Position = (298.1, 284.1) = 5 32 54.03 -37 0 57.9
  Extent = 13.5 (13.4-13.6)", rotation angle = 0
  Source counts = 172.0 +/- 25.8
  Background counts = 494.6
  Rate = 0.01 +/- 0.002
[Sat Sep  1 07:36:48 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 07:36:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 07:36:48 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 07:36:48 2012] Source does appear to be extended
[Sat Sep  1 07:36:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 07:36:48 2012] Source is confused with source 6
[Sat Sep  1 08:34:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep  1 08:34:44 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Sat Sep  1 08:34:44 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.225
[Sat Sep  1 08:34:44 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.55"
[Sat Sep  1 09:38:59 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src5.ximg exists
[Sat Sep  1 09:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src5.csv
[Sat Sep  1 09:38:59 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Sep  1 09:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src5.csv
[Sat Sep  1 09:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 09:39:00 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Sep  1 09:39:00 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Sep  1 09:39:00 2012] Fit fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Sep  1 09:39:10 2012] Warning, spatial fit 5 centroid is now closest to src. 13
[Sat Sep  1 09:39:10 2012] Source 7 is offset by -5.401195 and 4.575494 pixels which is larger than
2 X fitted extent = 4.571761 x 4.571761, not incorporating fit results
[Sat Sep  1 09:39:10 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 09:39:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 09:39:10 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 09:39:10 2012] Source does appear to be extended
[Sat Sep  1 09:39:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 09:52:25 2012] XMMSAS src. selection expression = ellipse(25885.772000, 24665.744000, 812.946023, 812.946023, 0.000000, X, Y)
[Sat Sep  1 09:52:25 2012] Writing source region out to fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src7_src.reg
[Sat Sep  1 09:52:25 2012] Extracting stamp from image fullrun_mos2_xmm0042341801_pi300-10000_cl_sm2.00.img.gz, (251, 237) - (345, 331)
[Sat Sep  1 09:52:25 2012] XMMSAS bgd. selection expression = annulus(25885.772000, 24665.744000, 1354.910039, 2709.820078, X, Y) && !ellipse(25421.286000, 23864.960000, 1872.464054, 1311.240038, 242.789000, X, Y) && !ellipse(24094.536000, 23649.908600, 1250.936036, 1250.936036, 0.000000, X, Y) && !ellipse(24613.273285, 23172.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.687286, 24452.588257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25112.710800, 24892.980000, 1099.040032, 1099.040032, 0.000000, X, Y) && !ellipse(26989.038635, 23609.316437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.383850, 22663.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26915.876648, 24736.620636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.437988, 23104.151978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24248.456329, 24977.705261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23576.558685, 23537.598785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.350000, 22162.538000, 1287.432037, 1287.432037, 0.000000, X, Y) && !ellipse(27520.952515, 23599.529999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.483917, 24579.296875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29326.348541, 24565.517273, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  1 09:52:25 2012] Writing fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src7.gif
[Sat Sep  1 09:53:01 2012] Mean detx,y = (624.17, -245.10) 
[Sat Sep  1 09:53:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 09:53:07 2012] grppha failed
[Sat Sep  1 09:53:07 2012] Setting source spectrum file to fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src7_src.pi.gz
[Sat Sep  1 09:53:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Sep  1 09:55:47 2012] Updating aperture counts using extracted products
[Sat Sep  1 09:55:47 2012] Error reading totcts from fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src7_src.pi.gz
[Sat Sep  1 09:55:48 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 09:55:49 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Sat Sep  1 09:55:49 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Sat Sep  1 09:55:49 2012] Source 7 has no response, skipping
[Sat Sep  1 09:55:50 2012] xmm0042341801/analysis//spectral/fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete