[Sat Sep 1 05:37:45 2012] Detection parameters: Position = (309.9, 284.9) = 5 32 49.73 -37 0 53.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 63.4 +/- 11.6 Background counts = 10.3 Rate = 0.005 +/- 0.001 [Sat Sep 1 05:37:46 2012] Off-axis axis estimate = 1.29' [Sat Sep 1 06:46:44 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting [Sat Sep 1 06:46:44 2012] Initial guess for spatial extent in simple fitting = 7.07" [Sat Sep 1 06:46:44 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885 [Sat Sep 1 06:46:44 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.07" [Sat Sep 1 07:36:37 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src14.ximg exists [Sat Sep 1 07:36:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src14.csv [Sat Sep 1 07:36:37 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src14_1.ximg exists [Sat Sep 1 07:36:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src14.csv [Sat Sep 1 07:36:37 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Sep 1 07:36:38 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Sat Sep 1 07:36:38 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Sat Sep 1 07:36:38 2012] Fit fullrun_mos2_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly [Sat Sep 1 07:36:48 2012] Source 13 is offset by 6.439088 and 5.390168 pixels which is larger than 2 X fitted extent = 4.912322 x 4.912322, not incorporating fit results [Sat Sep 1 07:36:48 2012] Source 13 is offset by -1.075027 and 6.362168 pixels which is larger than 2 X fitted extent = 6.991035 x 3.494929, not incorporating fit results [Sat Sep 1 07:36:48 2012] Vigneting correction estimate = 1.000000 [Sat Sep 1 07:36:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Sep 1 07:36:48 2012] Assessing source extent using major [Sat Sep 1 07:36:48 2012] Source does appear to be extended [Sat Sep 1 07:36:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Sep 1 08:34:44 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting [Sat Sep 1 08:34:44 2012] Initial guess for spatial extent in simple fitting = 7.07" [Sat Sep 1 08:34:44 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885 [Sat Sep 1 08:34:44 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.07" [Sat Sep 1 09:38:59 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src13.ximg exists [Sat Sep 1 09:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src13.csv [Sat Sep 1 09:38:59 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src13_1.ximg exists [Sat Sep 1 09:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src13.csv [Sat Sep 1 09:38:59 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Sep 1 09:39:00 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Sat Sep 1 09:39:00 2012] fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Sat Sep 1 09:39:00 2012] Fit fullrun_mos2_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Sat Sep 1 09:39:10 2012] Source 13 is offset by 4.009525 and -4.039395 pixels which is larger than 2 X fitted extent = 1.678230 x 1.678230, not incorporating fit results [Sat Sep 1 09:39:10 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.231644 pixels away [Sat Sep 1 09:39:10 2012] Warning, spatial fit 13 centroid is now closest to src. 7 [Sat Sep 1 09:39:10 2012] Vigneting correction estimate = 1.000000 [Sat Sep 1 09:39:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Sep 1 09:39:10 2012] Assessing source extent using major [Sat Sep 1 09:39:10 2012] Source does appear to be extended [Sat Sep 1 09:39:10 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Sep 1 09:52:25 2012] XMMSAS src. selection expression = ellipse(26915.876648, 24736.620636, 652.500000, 652.500000, 0.000000, X, Y) [Sat Sep 1 09:52:25 2012] Writing source region out to fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src13_src.reg [Sat Sep 1 09:52:25 2012] Extracting stamp from image fullrun_mos2_xmm0042341801_pi300-10000_cl_sm2.00.img.gz, (272, 247) - (347, 322) [Sat Sep 1 09:52:25 2012] XMMSAS bgd. selection expression = annulus(26915.876648, 24736.620636, 1087.500000, 2175.000000, X, Y) && !ellipse(25421.286000, 23864.960000, 1872.464054, 1311.240038, 242.789000, X, Y) && !ellipse(24094.536000, 23649.908600, 1250.936036, 1250.936036, 0.000000, X, Y) && !ellipse(24613.273285, 23172.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.772000, 24665.744000, 1083.928031, 1083.928031, 0.000000, X, Y) && !ellipse(24175.687286, 24452.588257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25112.710800, 24892.980000, 1099.040032, 1099.040032, 0.000000, X, Y) && !ellipse(26989.038635, 23609.316437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.383850, 22663.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.437988, 23104.151978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24248.456329, 24977.705261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.350000, 22162.538000, 1287.432037, 1287.432037, 0.000000, X, Y) && !ellipse(27520.952515, 23599.529999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.483917, 24579.296875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29326.348541, 24565.517273, 870.000000, 870.000000, 0.000000, X, Y) [Sat Sep 1 09:52:25 2012] Writing fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src13.gif [Sat Sep 1 09:54:02 2012] Mean detx,y = (1683.96, -182.05) [Sat Sep 1 09:54:03 2012] Setting backscal keywords in source and bgd. spectrum [Sat Sep 1 09:54:08 2012] grppha failed [Sat Sep 1 09:54:08 2012] Setting source spectrum file to fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src13_src.pi.gz [Sat Sep 1 09:54:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src13_bgd.pi.gz [Sat Sep 1 09:55:36 2012] Not generating rmf since there are only 63 counts [Sat Sep 1 09:55:36 2012] rmf not generated due to insufficient counts [Sat Sep 1 09:55:48 2012] Updating aperture counts using extracted products [Sat Sep 1 09:55:48 2012] Error reading totcts from fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src13_src.pi.gz [Sat Sep 1 09:55:48 2012] No arf file for this source, not re-computing flux [Sat Sep 1 09:55:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Sep 1 09:55:50 2012] xmm0042341801/analysis//spectral/fullrun_mos2_xmm0042341801_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete