[Sat Sep  1 05:37:23 2012] Detection parameters:
  Position = (293.0, 275.1) = 5 32 55.88 -37 1 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1177.6 +/- 42.3
  Background counts = 13.8
  Rate = 0.1 +/- 0.004

[Sat Sep  1 05:37:23 2012] Off-axis axis estimate = 1.74'
[Sat Sep  1 06:18:12 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 06:18:12 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Sep  1 06:18:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Sep  1 06:18:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sat Sep  1 06:46:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep  1 06:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 06:46:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep  1 06:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 06:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 06:46:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep  1 06:46:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep  1 06:46:43 2012] Fit fullrun_mos1_xmm0042341801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep  1 07:36:44 2012] Warning, spatial fit 1 centroid is now closest to src. 15
[Sat Sep  1 07:36:45 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 07:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 07:36:45 2012] Assessing source extent using major
[Sat Sep  1 07:36:45 2012] Source does appear to be extended
[Sat Sep  1 07:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 08:09:53 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 08:09:53 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Sep  1 08:09:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Sep  1 08:09:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Sat Sep  1 08:34:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep  1 08:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 08:34:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep  1 08:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 08:34:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 08:34:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep  1 08:34:43 2012] fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep  1 08:34:43 2012] Fit fullrun_mos1_xmm0042341801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  1 09:39:07 2012] Spatial fit model total counts = 3069.980000, observed total counts = 3066.000000
[Sat Sep  1 09:39:07 2012] Offset between fit and detection position for source 1 = 0.291494 pixels
[Sat Sep  1 09:39:07 2012] 3068.010000 total counts/ 1610.970000 bgd. counts: snr = 36.301766
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.291494 pixels
  Position = (293.2, 275.3) = 5 32 55.82 -37 1 36.0
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 1457.0 +/- 55.4
  Background counts = 1611.0
  Rate = 0.1 +/- 0.005
[Sat Sep  1 09:39:07 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 09:39:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 09:39:07 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 09:39:07 2012] Source does appear to be extended
[Sat Sep  1 09:39:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 09:47:14 2012] Counts = 1457.040000, rescaling region sizes by 2.000000
[Sat Sep  1 09:47:14 2012] XMMSAS src. selection expression = ellipse(25458.809100, 23902.840400, 1751.484050, 1751.484050, 0.000000, X, Y)
[Sat Sep  1 09:47:14 2012] Writing source region out to fullrun_mos1_xmm0042341801_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep  1 09:47:14 2012] Extracting stamp from image fullrun_mos1_xmm0042341801_pi300-10000_cl_sm2.00.img.gz, (193, 175) - (394, 376)
[Sat Sep  1 09:47:14 2012] XMMSAS bgd. selection expression = annulus(25458.809100, 23902.840400, 5838.280168, 11676.560336, X, Y) && !ellipse(36869.833710, 16996.721710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36844.484920, 34599.656400, 503.679214, 503.679214, 0.000000, X, Y) && !ellipse(23959.528000, 25200.050000, 1146.776033, 1146.776033, 0.000000, X, Y) && !ellipse(23954.212000, 23327.598000, 1910.288055, 1910.288055, 0.000000, X, Y) && !ellipse(27473.022800, 30076.666800, 291.129608, 291.129608, 0.000000, X, Y) && !ellipse(26807.158508, 23119.330780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30107.553741, 23525.122803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23098.862000, 22634.178000, 1267.792036, 1267.792036, 0.000000, X, Y) && !ellipse(25486.655792, 25432.307343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25874.749390, 22235.784821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17723.680679, 20716.940796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24946.680000, 25062.770000, 1107.456032, 1107.456032, 0.000000, X, Y) && !ellipse(23501.864746, 23619.912659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26809.186951, 25253.496429, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  1 09:47:14 2012] Writing fullrun_mos1_xmm0042341801_pi300-10000_pass1_cl_src1.gif
[Sat Sep  1 09:47:16 2012] Mean detx,y = (346.65, -322.02) 
[Sat Sep  1 09:47:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 09:50:08 2012] grppha failed
[Sat Sep  1 09:50:08 2012] Setting source spectrum file to fullrun_mos1_xmm0042341801_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 09:50:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042341801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep  1 09:55:47 2012] Updating aperture counts using extracted products
[Sat Sep  1 09:55:47 2012] Error reading totcts from fullrun_mos1_xmm0042341801_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 09:55:47 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 09:55:48 2012] Source 1 has no response, skipping
[Sat Sep  1 09:55:49 2012] xmm0042341801/analysis//spectral/fullrun_mos1_xmm0042341801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete