[Tue Jun 25 01:13:11 2013] Detection parameters:
  Position = (179.4, 294.3) = 4 37 40.54 0 44 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18.3 +/- 5.6
  Background counts = 2.9
  Rate = 0.009 +/- 0.003

[Tue Jun 25 01:13:11 2013] Off-axis axis estimate = 8.64'
[Tue Jun 25 01:14:26 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 01:14:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 01:14:26 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Tue Jun 25 01:14:26 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Tue Jun 25 01:14:26 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.75"
[Tue Jun 25 01:37:12 2013] fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 25 01:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_src5.csv
[Tue Jun 25 01:37:12 2013] fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 25 01:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_src5.csv
[Tue Jun 25 01:37:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 01:37:12 2013] fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 25 01:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 25 01:37:12 2013] fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 25 01:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 25 01:37:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 01:54:53 2013] Spatial fit model total counts = 64.118600, observed total counts = 57.000000
[Tue Jun 25 01:54:53 2013] Offset between fit and detection position for source 5 = 2.617884 pixels
[Tue Jun 25 01:54:53 2013] 64.316100 total counts/ 49.275600 bgd. counts: snr = 2.142626
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.617884 pixels
  Position = (179.4, 291.7) = 4 37 40.54 0 44 26.6
  Extent = 14.7 (9.3-21.5)", rotation angle = 90 (81-101) degrees
  Source counts = 15.0 +/- 8.0
  Background counts = 49.3
  Rate = 0.008 +/- 0.004
[Tue Jun 25 01:54:53 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 01:54:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 01:54:53 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 01:54:53 2013] Source does appear to be extended
[Tue Jun 25 01:54:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.94
[Tue Jun 25 01:54:53 2013] Source is asymmetric
[Tue Jun 25 01:54:53 2013] Deleting source due to low Poisson probability 1.0