[Mon May 13 14:06:48 2013] Detection parameters:
  Position = (332.5, 321.7) = 23 37 36.83 0 17 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.8 +/- 16.7
  Background counts = 24.1
  Rate = 0.02 +/- 0.003

[Mon May 13 14:06:50 2013] Off-axis axis estimate = 2.99'
[Mon May 13 14:07:21 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:21 2013] Initial guess for spatial extent in simple fitting = 7.92"
[Mon May 13 14:07:21 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.649
[Mon May 13 14:07:21 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.92"
[Mon May 13 14:07:21 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_src10.ximg exists
[Mon May 13 14:07:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_src10.csv
[Mon May 13 14:07:21 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon May 13 14:07:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_src10.csv
[Mon May 13 14:07:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:22 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon May 13 14:07:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon May 13 14:07:22 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon May 13 14:07:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon May 13 14:07:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:43 2013] Warning, spatial fit 10 centroid is now closest to src. 28
[Mon May 13 14:07:43 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:43 2013] Assessing source extent using major
[Mon May 13 14:07:43 2013] Source does appear to be extended
[Mon May 13 14:07:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:07:43 2013] Source is confused with source 11
[Mon May 13 14:08:11 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:11 2013] Initial guess for spatial extent in simple fitting = 7.92"
[Mon May 13 14:08:11 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.649
[Mon May 13 14:08:11 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.92"
[Mon May 13 14:08:12 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_src10.ximg exists
[Mon May 13 14:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_src10.csv
[Mon May 13 14:08:12 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon May 13 14:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_src10.csv
[Mon May 13 14:08:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:12 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon May 13 14:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon May 13 14:08:12 2013] fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon May 13 14:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon May 13 14:08:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:25 2013] Source 10 is offset by 5.857103 and 5.345716 pixels which is larger than
2 X fitted extent = 0.910901 x 7.287219, not incorporating fit results
[Mon May 13 14:08:25 2013] Source 10 is offset by -1.946320 and -5.364284 pixels which is larger than
2 X fitted extent = 0.795899 x 0.795899, not incorporating fit results
[Mon May 13 14:08:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:25 2013] Assessing source extent using major
[Mon May 13 14:08:25 2013] Source does appear to be extended
[Mon May 13 14:08:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:50 2013] XMMSAS src. selection expression = ellipse(28881.131989, 27940.561310, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 14:08:50 2013] Not overwriting source region fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src.reg
[Mon May 13 14:08:50 2013] Extracting stamp from image fullrun_pn_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (295, 284) - (370, 359)
[Mon May 13 14:08:50 2013] XMMSAS bgd. selection expression = annulus(28881.131989, 27940.561310, 1087.500000, 2175.000000, X, Y) && !ellipse(28564.241200, 26477.974040, 1216.408035, 1216.408035, 0.000000, X, Y) && !ellipse(29221.175200, 26375.540400, 684.452020, 684.452020, 0.000000, X, Y) && !ellipse(28402.366000, 26586.942200, 1184.568034, 1184.568034, 0.000000, X, Y) && !ellipse(29347.556915, 27768.735779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26573.324768, 26906.889374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.862762, 28513.301575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28182.264557, 28269.782288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26316.232971, 25968.440063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31734.863678, 25218.750061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.899658, 25101.785400, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:50 2013] Writing fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10.gif
[Mon May 13 14:08:51 2013] ../../xmm0042341301/products/events/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0042341301/products/events/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon May 13 14:08:52 2013] Mean detx,y = (1071.19, -1444.80) 
[Mon May 13 14:08:52 2013] ../../xmm0042341301/products/images/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src.img and ../../xmm0042341301/products/images/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon May 13 14:08:52 2013] ../../xmm0042341301/products/spectra/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon May 13 14:08:52 2013] Setting source spectrum file to fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 13 14:08:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon May 13 14:08:52 2013] ../../xmm0042341301/products/lightcurves/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon May 13 14:08:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 14:08:55 2013] rmf not generated due to insufficient counts
[Mon May 13 14:08:55 2013] fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Mon May 13 16:33:41 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:41 2013] Total counts from fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 527.00
[Mon May 13 16:33:41 2013] Total counts from fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1294.00
[Mon May 13 16:33:41 2013] Got source and background scale factors 886557.000000, 4934531.000000
[Mon May 13 16:33:41 2013] User source parameters:
  Position = (332.5, 321.7) = 23 37 36.83 0 17 11.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 294.5 +/- 24.0
  Background aperture counts = 232.5
  Rate = 0.03 +/- 0.003

[Mon May 13 16:33:41 2013] Updating counts from extracted products
[Mon May 13 16:33:41 2013] Set source signif. to 294.51/15.25 = 19.32
[Mon May 13 16:33:45 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:45 2013] Using photon index=1.80, rate=0.0327, arf fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10.arf
[Mon May 13 16:33:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:45 2013] Updating source flux to 1e-13
[Mon May 13 16:34:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:34:07 2013] xmm0042341301/analysis//spectral/fullrun_pn_xmm0042341301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete