[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (438.0, 380.3) = 23 37 6.23 0 21 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 11.9
  Background counts = 3.3
  Rate = 0.007 +/- 0.0009

[Mon May 13 14:06:54 2013] Off-axis axis estimate = 11.73'
[Mon May 13 14:07:29 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 14:07:29 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Mon May 13 14:07:29 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Mon May 13 14:07:29 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 12.29"
[Mon May 13 14:07:30 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 13 14:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src11.csv
[Mon May 13 14:07:30 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 13 14:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src11.csv
[Mon May 13 14:07:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 13 14:07:31 2013] Fit fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 13 14:08:00 2013] Spatial fit model total counts = 112.999000, observed total counts = 113.000000
[Mon May 13 14:08:00 2013] Offset between fit and detection position for source 5 = 0.547732 pixels
[Mon May 13 14:08:00 2013] 113.702700 total counts/ 46.168600 bgd. counts: snr = 9.939162
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.547732 pixels
  Position = (437.6, 380.6) = 23 37 6.35 0 21 32.7
  Extent = 6.5 (5.4-8.2)", rotation angle = 0
  Source counts = 67.5 +/- 10.7
  Background counts = 46.2
  Rate = 0.005 +/- 0.0008
[Mon May 13 14:08:00 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:00 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:00 2013] Source does appear to be extended
[Mon May 13 14:08:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:15 2013] Initial guess for spatial extent in simple fitting = 6.48"
[Mon May 13 14:08:15 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Mon May 13 14:08:15 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 6.48"
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 13 14:08:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src11.csv
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 13 14:08:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src11.csv
[Mon May 13 14:08:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 13 14:08:16 2013] Fit fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 13 14:08:39 2013] Spatial fit model total counts = 107.000000, observed total counts = 107.000000
[Mon May 13 14:08:39 2013] Offset between fit and detection position for source 5 = 0.042209 pixels
[Mon May 13 14:08:39 2013] 108.439300 total counts/ 39.937100 bgd. counts: snr = 10.839675
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.042209 pixels
  Position = (437.6, 380.6) = 23 37 6.36 0 21 32.8
  Extent = 6.6 (5.4-8.2)", rotation angle = 0
  Source counts = 68.5 +/- 10.4
  Background counts = 39.9
  Rate = 0.005 +/- 0.0008
[Mon May 13 14:08:39 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:39 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:39 2013] Source does appear to be extended
[Mon May 13 14:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:33:19 2013] XMMSAS src. selection expression = ellipse(38022.897600, 33067.725600, 398.499011, 398.499011, 0.000000, X, Y)
[Mon May 13 16:33:19 2013] Not overwriting source region fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src.reg
[Mon May 13 16:33:19 2013] Extracting stamp from image fullrun_mos2_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (415, 358) - (461, 404)
[Mon May 13 16:33:19 2013] XMMSAS bgd. selection expression = annulus(38022.897600, 33067.725600, 664.165019, 1328.330038, X, Y) && !ellipse(37742.478760, 31369.652600, 644.673619, 644.673619, 0.000000, X, Y)
[Mon May 13 16:33:19 2013] Writing fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5.gif
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon May 13 16:33:20 2013] Mean detx,y = (-7465.67, 9449.14) 
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src.img and ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon May 13 16:33:20 2013] Setting source spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 13 16:33:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon May 13 16:33:24 2013] Not generating rmf since there are only 68 counts
[Mon May 13 16:33:24 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:24 2013] fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Mon May 13 16:33:51 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:51 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 78.00
[Mon May 13 16:33:51 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 73.00
[Mon May 13 16:33:51 2013] Got source and background scale factors 494400.000000, 4009412.000000
[Mon May 13 16:33:51 2013] User source parameters:
  Position = (437.6, 380.6) = 23 37 6.36 0 21 32.8
  Extent = 6.6 (5.4-8.2)", rotation angle = 0
  Source aperture counts = 69.0 +/- 9.9
  Background aperture counts = 9.0
  Rate = 0.005 +/- 0.0007

[Mon May 13 16:33:55 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:55 2013] Using photon index=1.80, rate=0.00513, arf fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5.arf
[Mon May 13 16:33:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:55 2013] Updating source flux to 1.3e-13
[Mon May 13 16:34:01 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:03 2013] xmm0042341301/analysis//spectral/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete