[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (213.1, 369.3) = 23 38 11.46 0 20 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.9 +/- 13.0
  Background counts = 3.1
  Rate = 0.009 +/- 0.001

[Mon May 13 14:06:54 2013] Off-axis axis estimate = 8.04'
[Mon May 13 14:07:29 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 14:07:29 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Mon May 13 14:07:29 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Mon May 13 14:07:29 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.45"
[Mon May 13 14:07:29 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src7.ximg exists
[Mon May 13 14:07:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src7.csv
[Mon May 13 14:07:29 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon May 13 14:07:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src7.csv
[Mon May 13 14:07:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon May 13 14:07:31 2013] Fit fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon May 13 14:08:00 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.013304 pixels away
[Mon May 13 14:08:00 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:00 2013] Assessing source extent using major
[Mon May 13 14:08:00 2013] Source does appear to be extended
[Mon May 13 14:08:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:15 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:15 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Mon May 13 14:08:15 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Mon May 13 14:08:15 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.45"
[Mon May 13 14:08:15 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src7.ximg exists
[Mon May 13 14:08:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src7.csv
[Mon May 13 14:08:15 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon May 13 14:08:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src7.csv
[Mon May 13 14:08:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon May 13 14:08:16 2013] Fit fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon May 13 14:08:39 2013] Spatial fit model total counts = 143.899000, observed total counts = 144.000000
[Mon May 13 14:08:39 2013] Offset between fit and detection position for source 4 = 0.303888 pixels
[Mon May 13 14:08:39 2013] 145.262600 total counts/ 64.382600 bgd. counts: snr = 10.079915
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.303888 pixels
  Position = (213.1, 369.6) = 23 38 11.47 0 20 44.8
  Extent = 5.6 (4.6-7.1)", rotation angle = 0
  Source counts = 80.9 +/- 12.1
  Background counts = 64.4
  Rate = 0.006 +/- 0.0009
[Mon May 13 14:08:39 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:39 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:39 2013] Source does appear to be extended
[Mon May 13 14:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:33:19 2013] XMMSAS src. selection expression = ellipse(18490.105200, 32107.848000, 337.342210, 337.342210, 0.000000, X, Y)
[Mon May 13 16:33:19 2013] Not overwriting source region fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src.reg
[Mon May 13 16:33:19 2013] Extracting stamp from image fullrun_mos2_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (194, 350) - (232, 389)
[Mon May 13 16:33:19 2013] XMMSAS bgd. selection expression = annulus(18490.105200, 32107.848000, 562.237016, 1124.474032, X, Y)
[Mon May 13 16:33:19 2013] Writing fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4.gif
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon May 13 16:33:20 2013] Mean detx,y = (10362.89, 1412.85) 
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src.img and ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon May 13 16:33:20 2013] Setting source spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 13 16:33:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon May 13 16:33:24 2013] Not generating rmf since there are only 80 counts
[Mon May 13 16:33:24 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:24 2013] fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Mon May 13 16:33:51 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:51 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 92.00
[Mon May 13 16:33:51 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 73.00
[Mon May 13 16:33:51 2013] Got source and background scale factors 338704.000000, 2899824.000000
[Mon May 13 16:33:51 2013] User source parameters:
  Position = (213.1, 369.6) = 23 38 11.47 0 20 44.8
  Extent = 5.6 (4.6-7.1)", rotation angle = 0
  Source aperture counts = 83.5 +/- 10.6
  Background aperture counts = 8.5
  Rate = 0.006 +/- 0.0008

[Mon May 13 16:33:55 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:55 2013] Using photon index=1.80, rate=0.00605, arf fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4.arf
[Mon May 13 16:33:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:55 2013] Updating source flux to 1.5e-13
[Mon May 13 16:34:01 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:03 2013] xmm0042341301/analysis//spectral/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete