[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (320.0, 308.2) = 23 37 40.46 0 16 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 307.1 +/- 21.6
  Background counts = 8.6
  Rate = 0.02 +/- 0.002

[Mon May 13 14:06:54 2013] Off-axis axis estimate = 1.72'
[Mon May 13 14:07:29 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:29 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Mon May 13 14:07:29 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon May 13 14:07:29 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Mon May 13 14:07:29 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 13 14:07:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src3.csv
[Mon May 13 14:07:29 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 13 14:07:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src3.csv
[Mon May 13 14:07:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 13 14:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 13 14:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May 13 14:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:00 2013] Warning, spatial fit 3 centroid is now closest to src. 11
[Mon May 13 14:08:00 2013] Spatial fit model total counts = 925.436000, observed total counts = 924.000000
[Mon May 13 14:08:00 2013] Offset between fit and detection position for source 3 = 0.693486 pixels
[Mon May 13 14:08:00 2013] Warning, changing simple spatial fit ID from 3 to 4
[Mon May 13 14:08:00 2013] 921.930000 total counts/ 809.845000 bgd. counts: snr = 3.938642
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.693486 pixels
  Position = (319.7, 307.6) = 23 37 40.56 0 16 15.1
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 112.1 +/- 30.4
  Background counts = 809.8
  Rate = 0.008 +/- 0.002
[Mon May 13 14:08:00 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:00 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:00 2013] Source does appear to be extended
[Mon May 13 14:08:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:00 2013] Source is confused with source 11
[Mon May 13 14:08:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 14:08:15 2013] Initial guess for spatial extent in simple fitting = 14.46"
[Mon May 13 14:08:15 2013] source mask rpix=3.3, npix_max = 58, mask sum = 42, frac = 0.718
[Mon May 13 14:08:15 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 14.46"
[Mon May 13 14:08:15 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 13 14:08:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src3.csv
[Mon May 13 14:08:15 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 13 14:08:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src3.csv
[Mon May 13 14:08:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 13 14:08:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 13 14:08:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 13 14:08:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:39 2013] Warning, spatial fit 3 centroid is now closest to src. 42
[Mon May 13 14:08:39 2013] Spatial fit model total counts = 922.984000, observed total counts = 924.000000
[Mon May 13 14:08:39 2013] Offset between fit and detection position for source 3 = 0.386127 pixels
[Mon May 13 14:08:39 2013] Warning, changing simple spatial fit ID from 3 to 4
[Mon May 13 14:08:39 2013] 906.911000 total counts/ 807.130000 bgd. counts: snr = 3.512175
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.386127 pixels
  Position = (320.0, 307.6) = 23 37 40.45 0 16 14.9
  Extent = 14.3 (13.9-14.5)", rotation angle = 0
  Source counts = 99.8 +/- 30.1
  Background counts = 807.1
  Rate = 0.007 +/- 0.002
[Mon May 13 14:08:39 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:39 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:39 2013] Source does appear to be extended
[Mon May 13 14:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:33:18 2013] XMMSAS src. selection expression = ellipse(27795.612000, 26709.716000, 856.854025, 856.854025, 0.000000, X, Y)
[Mon May 13 16:33:18 2013] Not overwriting source region fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src.reg
[Mon May 13 16:33:18 2013] Extracting stamp from image fullrun_mos2_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (271, 258) - (369, 357)
[Mon May 13 16:33:18 2013] XMMSAS bgd. selection expression = annulus(27795.612000, 26709.716000, 1428.090041, 2856.180082, X, Y) && !ellipse(28583.710297, 26405.420715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27278.535065, 27264.381104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.285522, 27621.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29442.768921, 27434.366699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29964.997253, 26149.398895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29887.265961, 27094.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.811401, 25648.381592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.462000, 27790.484000, 2356.704068, 2356.704068, 0.000000, X, Y) && !ellipse(28321.993439, 28213.426636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30663.316636, 24750.309200, 225.907207, 225.907207, 0.000000, X, Y) && !ellipse(27423.029724, 28216.416199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30615.904000, 25641.962000, 1298.984037, 1298.984037, 0.000000, X, Y) && !ellipse(26423.254000, 26562.832000, 1052.408030, 1052.408030, 0.000000, X, Y) && !ellipse(29049.341370, 25204.540344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30004.647461, 27863.501740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27841.730499, 25162.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26078.228180, 26233.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26540.245758, 27879.195618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.183289, 24831.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.066956, 25495.420044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.870117, 28283.500824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.326782, 25907.732819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26631.394000, 28494.046000, 2401.744069, 2401.744069, 0.000000, X, Y)
[Mon May 13 16:33:18 2013] Writing fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3.gif
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 13 16:33:20 2013] Mean detx,y = (-350.62, -184.48) 
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 13 16:33:20 2013] Setting source spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 13 16:33:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 13 16:33:24 2013] Not generating rmf since there are only 99 counts
[Mon May 13 16:33:24 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:24 2013] fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Mon May 13 16:33:50 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:50 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1459.00
[Mon May 13 16:33:50 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 93.00
[Mon May 13 16:33:50 2013] Got source and background scale factors 2067836.000000, 1143456.000000
[Mon May 13 16:33:50 2013] User source parameters:
  Position = (320.0, 307.6) = 23 37 40.45 0 16 14.9
  Extent = 14.3 (13.9-14.5)", rotation angle = 0
  Source aperture counts = 1290.8 +/- 39.2
  Background aperture counts = 168.2
  Rate = 0.1 +/- 0.003

[Mon May 13 16:33:55 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:55 2013] Using photon index=1.80, rate=0.00747, arf fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3.arf
[Mon May 13 16:33:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:55 2013] Updating source flux to 8.3e-14
[Mon May 13 16:34:01 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Mon May 13 16:34:01 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:03 2013] xmm0042341301/analysis//spectral/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete