[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (329.1, 304.1) = 23 37 37.82 0 15 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 460.9 +/- 26.3
  Background counts = 8.9
  Rate = 0.04 +/- 0.002

[Mon May 13 14:06:54 2013] Off-axis axis estimate = 2.26'
[Mon May 13 14:07:29 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:29 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Mon May 13 14:07:29 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Mon May 13 14:07:29 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.56"
[Mon May 13 14:07:29 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 14:07:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src1.csv
[Mon May 13 14:07:29 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 14:07:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src1.csv
[Mon May 13 14:07:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 14:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 14:07:31 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 14:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 14:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:00 2013] Spatial fit model total counts = 1728.880000, observed total counts = 1570.000000
[Mon May 13 14:08:00 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 14:08:00 2013] Source 1 is offset by -1.359583 and -7.466521 pixels which is larger than
2 X fitted extent = 7.465426 x 7.465426, not incorporating fit results
[Mon May 13 14:08:00 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:00 2013] Assessing source extent using major
[Mon May 13 14:08:00 2013] Source does appear to be extended
[Mon May 13 14:08:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:00 2013] Source is confused with source 2
[Mon May 13 14:08:15 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:15 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Mon May 13 14:08:15 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Mon May 13 14:08:15 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.56"
[Mon May 13 14:08:15 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 14:08:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src1.csv
[Mon May 13 14:08:15 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 14:08:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src1.csv
[Mon May 13 14:08:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 14:08:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 14:08:16 2013] fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 14:08:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 14:08:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:39 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Mon May 13 14:08:39 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:39 2013] Assessing source extent using major
[Mon May 13 14:08:39 2013] Source does appear to be extended
[Mon May 13 14:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:33:18 2013] XMMSAS src. selection expression = ellipse(28583.710297, 26405.420715, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:33:18 2013] Not overwriting source region fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 16:33:18 2013] Extracting stamp from image fullrun_mos2_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (292, 267) - (367, 342)
[Mon May 13 16:33:18 2013] XMMSAS bgd. selection expression = annulus(28583.710297, 26405.420715, 1087.500000, 2175.000000, X, Y) && !ellipse(27795.612000, 26709.716000, 1142.472033, 1142.472033, 0.000000, X, Y) && !ellipse(27278.535065, 27264.381104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.285522, 27621.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29442.768921, 27434.366699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29964.997253, 26149.398895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29887.265961, 27094.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.811401, 25648.381592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.462000, 27790.484000, 2356.704068, 2356.704068, 0.000000, X, Y) && !ellipse(28321.993439, 28213.426636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30663.316636, 24750.309200, 225.907207, 225.907207, 0.000000, X, Y) && !ellipse(27423.029724, 28216.416199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30615.904000, 25641.962000, 1298.984037, 1298.984037, 0.000000, X, Y) && !ellipse(26423.254000, 26562.832000, 1052.408030, 1052.408030, 0.000000, X, Y) && !ellipse(29049.341370, 25204.540344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30004.647461, 27863.501740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27841.730499, 25162.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26078.228180, 26233.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26540.245758, 27879.195618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.183289, 24831.705200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.066956, 25495.420044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.870117, 28283.500824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26631.394000, 28494.046000, 2401.744069, 2401.744069, 0.000000, X, Y)
[Mon May 13 16:33:18 2013] Writing fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1.gif
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0042341301/products/events/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon May 13 16:33:20 2013] Mean detx,y = (-1140.84, -160.78) 
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0042341301/products/images/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon May 13 16:33:20 2013] Setting source spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 16:33:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 13 16:33:20 2013] ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon May 13 16:33:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 16:33:24 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:24 2013] fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon May 13 16:33:50 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:50 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1199.00
[Mon May 13 16:33:50 2013] Total counts from fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1.00
[Mon May 13 16:33:50 2013] Got source and background scale factors 1232532.000000, 25600.000000
[Mon May 13 16:33:50 2013] User source parameters:
  Position = (329.1, 304.1) = 23 37 37.82 0 15 59.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1150.9 +/- 35.6
  Background aperture counts = 48.1
  Rate = 0.09 +/- 0.003

[Mon May 13 16:33:50 2013] Updating counts from extracted products
[Mon May 13 16:33:50 2013] Set source signif. to 1150.85/6.94 = 165.86
[Mon May 13 16:33:55 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:55 2013] Using photon index=1.80, rate=0.0861, arf fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1.arf
[Mon May 13 16:33:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:55 2013] Updating source flux to 8.4e-13
[Mon May 13 16:34:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:34:03 2013] xmm0042341301/analysis//spectral/fullrun_mos2_xmm0042341301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete