[Mon May 13 14:06:51 2013] Detection parameters:
  Position = (435.3, 361.1) = 23 37 7.02 0 20 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 11.2
  Background counts = 3.8
  Rate = 0.01 +/- 0.001

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 10.91'
[Mon May 13 14:07:23 2013] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 11.89"
[Mon May 13 14:07:23 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.005
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.89"
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src10.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src10.csv
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src10.csv
[Mon May 13 14:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:25 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon May 13 14:07:25 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon May 13 14:07:25 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon May 13 14:07:53 2013] Spatial fit model total counts = 104.996000, observed total counts = 105.000000
[Mon May 13 14:07:53 2013] Offset between fit and detection position for source 9 = 0.395391 pixels
[Mon May 13 14:07:53 2013] 102.971600 total counts/ 41.025000 bgd. counts: snr = 9.671485
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.395391 pixels
  Position = (435.0, 361.3) = 23 37 7.13 0 20 8.5
  Extent = 6.5 (5.4-8.0)", rotation angle = 0
  Source counts = 61.9 +/- 10.1
  Background counts = 41.0
  Rate = 0.005 +/- 0.0008
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 6.46"
[Mon May 13 14:08:13 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 6.46"
[Mon May 13 14:08:13 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 13 14:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src9.csv
[Mon May 13 14:08:13 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 13 14:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src9.csv
[Mon May 13 14:08:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 13 14:08:14 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 13 14:08:32 2013] Warning, spatial fit 9 centroid is now closest to src. 20
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:55 2013] XMMSAS src. selection expression = ellipse(37792.161000, 31380.885200, 387.651611, 387.651611, 0.000000, X, Y)
[Mon May 13 14:08:55 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src.reg
[Mon May 13 14:08:55 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (413, 339) - (457, 384)
[Mon May 13 14:08:55 2013] XMMSAS bgd. selection expression = annulus(37792.161000, 31380.885200, 646.086019, 1292.172037, X, Y) && !ellipse(38037.562570, 33036.906526, 847.715333, 366.043638, 59.823498, X, Y) && !ellipse(36824.467224, 31667.165741, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:55 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9.gif
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/events/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0042341301/products/events/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon May 13 14:08:57 2013] Mean detx,y = (7977.36, 7730.71) 
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/images/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src.img and ../../xmm0042341301/products/images/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/spectra/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon May 13 14:08:57 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 13 14:08:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/lightcurves/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon May 13 16:22:45 2013] Not generating rmf since there are only 61 counts
[Mon May 13 16:22:45 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:46 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:46 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 70.00
[Mon May 13 16:33:46 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 42.00
[Mon May 13 16:33:46 2013] Got source and background scale factors 480000.000000, 2606980.000000
[Mon May 13 16:33:46 2013] User source parameters:
  Position = (435.0, 361.3) = 23 37 7.13 0 20 8.5
  Extent = 6.5 (5.4-8.0)", rotation angle = 0
  Source aperture counts = 62.3 +/- 9.4
  Background aperture counts = 7.7
  Rate = 0.005 +/- 0.0007

[Mon May 13 16:33:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:50 2013] Using photon index=1.80, rate=0.00464, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9.arf
[Mon May 13 16:33:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:50 2013] Updating source flux to 9.4e-14
[Mon May 13 16:33:57 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete