[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (308.5, 141.4) = 23 37 43.81 0 4 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.9 +/- 7.9
  Background counts = 3.4
  Rate = 0.003 +/- 0.0006

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 11.41'
[Mon May 13 14:07:23 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Mon May 13 14:07:23 2013] source mask rpix=2.8, npix_max = 43, mask sum = 48, frac = 1.109
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.13"
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src35.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src35.csv
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src35.csv
[Mon May 13 14:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon May 13 14:07:28 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon May 13 14:07:53 2013] Spatial fit model total counts = 71.045200, observed total counts = 70.000000
[Mon May 13 14:07:53 2013] Offset between fit and detection position for source 47 = 0.466483 pixels
[Mon May 13 14:07:53 2013] 70.039200 total counts/ 36.235000 bgd. counts: snr = 5.615734
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.466483 pixels
  Position = (308.0, 141.4) = 23 37 43.95 0 4 12.2
  Extent = 8.3 (5.1-11.4)", rotation angle = 0
  Source counts = 33.8 +/- 8.4
  Background counts = 36.2
  Rate = 0.003 +/- 0.0006
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Mon May 13 14:08:13 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.857
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 8.33"
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src30.ximg exists
[Mon May 13 14:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src30.csv
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon May 13 14:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src30.csv
[Mon May 13 14:08:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon May 13 14:08:15 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Mon May 13 14:08:32 2013] Warning, spatial fit 30 centroid is now closest to src. 42
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:56 2013] XMMSAS src. selection expression = ellipse(26746.900626, 12254.951400, 499.952414, 499.952414, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47_src.reg
[Mon May 13 14:08:56 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (279, 113) - (337, 170)
[Mon May 13 14:08:56 2013] XMMSAS bgd. selection expression = annulus(26746.900626, 12254.951400, 833.254024, 1666.508048, X, Y)
[Mon May 13 14:08:56 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47.gif
[Mon May 13 14:12:27 2013] Mean detx,y = (-13869.04, 4303.37) 
[Mon May 13 14:12:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:12:37 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:12:37 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon May 13 14:12:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Mon May 13 16:32:47 2013] Not generating rmf since there are only 33 counts
[Mon May 13 16:32:47 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:49 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:49 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 49.00
[Mon May 13 16:33:49 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47_bgd.pi.gz = 96.00
[Mon May 13 16:33:49 2013] Got source and background scale factors 726068.000000, 6423712.000000
[Mon May 13 16:33:49 2013] User source parameters:
  Position = (308.0, 141.4) = 23 37 43.95 0 4 12.2
  Extent = 8.3 (5.1-11.4)", rotation angle = 0
  Source aperture counts = 38.1 +/- 8.1
  Background aperture counts = 10.9
  Rate = 0.003 +/- 0.0006

[Mon May 13 16:33:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:50 2013] Using photon index=1.80, rate=0.00253, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47.arf
[Mon May 13 16:33:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:50 2013] Updating source flux to 6.4e-14
[Mon May 13 16:33:57 2013] Source 47 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete