[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (365.7, 289.6) = 23 37 27.21 0 14 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.2 +/- 9.0
  Background counts = 9.4
  Rate = 0.003 +/- 0.0007

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 4.92'
[Mon May 13 14:07:23 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 8.89"
[Mon May 13 14:07:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.966
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.89"
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src32.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src32.csv
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src32.csv
[Mon May 13 14:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon May 13 14:07:28 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Mon May 13 14:07:53 2013] Spatial fit model total counts = 430.958000, observed total counts = 432.000000
[Mon May 13 14:07:53 2013] Offset between fit and detection position for source 38 = 8.818612 pixels
[Mon May 13 14:07:53 2013] Warning, changing simple spatial fit ID from 32 to 31
[Mon May 13 14:07:53 2013] 417.416900 total counts/ 369.227000 bgd. counts: snr = 2.507895
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 8.818612 pixels
  Position = (358.3, 294.3) = 23 37 29.37 0 15 17.2
  Extent = 16.7 (16.0-33.4)", rotation angle = 0
  Source counts = 48.2 +/- 20.4
  Background counts = 369.2
  Rate = 0.004 +/- 0.002
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:07:53 2013] Source is confused with source 41
[Mon May 13 14:08:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 16.68"
[Mon May 13 14:08:13 2013] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.077
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 16.68"
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src28.ximg exists
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon May 13 14:08:14 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src28 appears to have run properly
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon May 13 14:08:15 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon May 13 14:08:32 2013] Spatial fit model total counts = 433.421000, observed total counts = 432.000000
[Mon May 13 14:08:32 2013] Offset between fit and detection position for source 38 = 0.018316 pixels
[Mon May 13 14:08:32 2013] Warning, changing simple spatial fit ID from 28 to 27
[Mon May 13 14:08:32 2013] 419.891800 total counts/ 369.844000 bgd. counts: snr = 2.602410
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.018316 pixels
  Position = (358.3, 294.3) = 23 37 29.37 0 15 17.1
  Extent = 16.7 (14.6-33.4)", rotation angle = 0
  Source counts = 50.0 +/- 20.5
  Background counts = 369.8
  Rate = 0.004 +/- 0.002
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:56 2013] XMMSAS src. selection expression = ellipse(31120.060000, 25554.416000, 1001.028029, 1001.028029, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38_src.reg
[Mon May 13 14:08:56 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (301, 237) - (416, 352)
[Mon May 13 14:08:56 2013] XMMSAS bgd. selection expression = annulus(31120.060000, 25554.416000, 1668.380048, 3336.760096, X, Y) && !ellipse(28629.814000, 26469.089400, 2376.640068, 2376.640068, 0.000000, X, Y) && !ellipse(29265.214000, 26326.130000, 429.708812, 429.708812, 0.000000, X, Y) && !ellipse(29133.076000, 26254.420000, 1275.840037, 1275.840037, 0.000000, X, Y) && !ellipse(28890.324000, 27290.384000, 1064.856031, 1064.856031, 0.000000, X, Y) && !ellipse(29730.372000, 26468.354000, 1964.584057, 1964.584057, 0.000000, X, Y) && !ellipse(27612.139496, 27515.753967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.974200, 25704.930000, 1220.856035, 1220.856035, 0.000000, X, Y) && !ellipse(26978.222000, 27385.472000, 1157.440033, 1157.440033, 0.000000, X, Y) && !ellipse(27069.828000, 28114.280000, 1184.056034, 1184.056034, 0.000000, X, Y) && !ellipse(30620.689800, 24806.209400, 501.651214, 501.651214, 0.000000, X, Y) && !ellipse(29607.712616, 25562.698486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.181702, 28215.725891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.337463, 27599.222778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.412537, 26054.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28353.134277, 28815.714722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29526.936005, 28319.078217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31771.479187, 22842.153687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.526550, 25033.152893, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38.gif
[Mon May 13 14:11:41 2013] Mean detx,y = (77.51, 3476.96) 
[Mon May 13 14:11:42 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:12:11 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:12:11 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 13 14:12:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon May 13 16:32:32 2013] Not generating rmf since there are only 50 counts
[Mon May 13 16:32:32 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:48 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:48 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 306.00
[Mon May 13 16:33:48 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38_bgd.pi.gz = 511.00
[Mon May 13 16:33:49 2013] Got source and background scale factors 3164800.000000, 14175470.000000
[Mon May 13 16:33:49 2013] User source parameters:
  Position = (358.3, 294.3) = 23 37 29.37 0 15 17.1
  Extent = 16.7 (14.6-33.4)", rotation angle = 0
  Source aperture counts = 191.9 +/- 18.5
  Background aperture counts = 114.1
  Rate = 0.01 +/- 0.001

[Mon May 13 16:33:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:50 2013] Using photon index=1.80, rate=0.00374, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38.arf
[Mon May 13 16:33:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:50 2013] Updating source flux to 3.7e-14
[Mon May 13 16:33:57 2013] Flag c found in src. 38 procflags, skipping spectral fitting
[Mon May 13 16:33:57 2013] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete