[Mon May 13 14:06:52 2013] Detection parameters:
  Position = (351.2, 300.0) = 23 37 31.42 0 15 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.5 +/- 9.8
  Background counts = 11.9
  Rate = 0.003 +/- 0.0008

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 3.83'
[Mon May 13 14:07:23 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Mon May 13 14:07:23 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.34"
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src31.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src31.csv
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src31.csv
[Mon May 13 14:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon May 13 14:07:28 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon May 13 14:07:53 2013] Warning, spatial fit 31 centroid is now closest to src. 38
[Mon May 13 14:07:53 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 17.910762 pixels away
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:07:53 2013] Source is confused with source 38
[Mon May 13 14:08:13 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Mon May 13 14:08:13 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.34"
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src27.ximg exists
[Mon May 13 14:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src27.csv
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon May 13 14:08:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src27.csv
[Mon May 13 14:08:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon May 13 14:08:15 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Mon May 13 14:08:32 2013] Warning, spatial fit 27 centroid is now closest to src. 38
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:56 2013] XMMSAS src. selection expression = ellipse(30505.412537, 26054.460358, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35_src.reg
[Mon May 13 14:08:56 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (314, 263) - (389, 338)
[Mon May 13 14:08:56 2013] XMMSAS bgd. selection expression = annulus(30505.412537, 26054.460358, 1087.500000, 2175.000000, X, Y) && !ellipse(28629.814000, 26469.089400, 2376.640068, 2376.640068, 0.000000, X, Y) && !ellipse(29265.214000, 26326.130000, 429.708812, 429.708812, 0.000000, X, Y) && !ellipse(29133.076000, 26254.420000, 1275.840037, 1275.840037, 0.000000, X, Y) && !ellipse(28890.324000, 27290.384000, 1064.856031, 1064.856031, 0.000000, X, Y) && !ellipse(29730.372000, 26468.354000, 1964.584057, 1964.584057, 0.000000, X, Y) && !ellipse(27612.139496, 27515.753967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.974200, 25704.930000, 1220.856035, 1220.856035, 0.000000, X, Y) && !ellipse(30620.689800, 24806.209400, 501.651214, 501.651214, 0.000000, X, Y) && !ellipse(29607.712616, 25562.698486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.181702, 28215.725891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.337463, 27599.222778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31120.060000, 25554.416000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(28353.134277, 28815.714722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29526.936005, 28319.078217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.526550, 25033.152893, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35.gif
[Mon May 13 14:11:29 2013] Mean detx,y = (380.73, 2676.42) 
[Mon May 13 14:11:30 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:11:39 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:11:39 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May 13 14:11:39 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon May 13 16:32:27 2013] Not generating rmf since there are only 41 counts
[Mon May 13 16:32:27 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:48 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:48 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 276.00
[Mon May 13 16:33:48 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 93.00
[Mon May 13 16:33:48 2013] Got source and background scale factors 1336000.000000, 2260300.000000
[Mon May 13 16:33:48 2013] User source parameters:
  Position = (351.2, 300.0) = 23 37 31.42 0 15 40.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 221.0 +/- 17.6
  Background aperture counts = 55.0
  Rate = 0.02 +/- 0.001

[Mon May 13 16:33:48 2013] Updating counts from extracted products
[Mon May 13 16:33:48 2013] Set source signif. to 221.03/7.41 = 29.81
[Mon May 13 16:33:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:50 2013] Using photon index=1.80, rate=0.0165, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35.arf
[Mon May 13 16:33:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:50 2013] Updating source flux to 1.7e-13
[Mon May 13 16:33:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete