[Mon May 13 14:06:51 2013] Detection parameters:
  Position = (340.1, 317.8) = 23 37 34.65 0 16 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.5 +/- 11.1
  Background counts = 12.8
  Rate = 0.004 +/- 0.0009

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 3.33'
[Mon May 13 14:07:23 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon May 13 14:07:23 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 8.09"
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src29.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src29.csv
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src29.csv
[Mon May 13 14:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:27 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May 13 14:07:28 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May 13 14:07:28 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon May 13 14:07:53 2013] Warning, spatial fit 29 centroid is now closest to src. 11
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:13 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon May 13 14:08:13 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 8.09"
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src25.ximg exists
[Mon May 13 14:08:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src25.csv
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon May 13 14:08:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src25.csv
[Mon May 13 14:08:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon May 13 14:08:15 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May 13 14:08:15 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon May 13 14:08:32 2013] Source 30 is offset by -7.618006 and 1.287135 pixels which is larger than
2 X fitted extent = 7.441380 x 7.441380, not incorporating fit results
[Mon May 13 14:08:32 2013] Warning, spatial fit 25 centroid is now closest to src. 11
[Mon May 13 14:08:32 2013] Source 30 is offset by 7.629074 and -3.562520 pixels which is larger than
2 X fitted extent = 7.573471 x 7.573471, not incorporating fit results
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:32 2013] Source is confused with source 11
[Mon May 13 14:08:56 2013] XMMSAS src. selection expression = ellipse(29536.337463, 27599.222778, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30_src.reg
[Mon May 13 14:08:56 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (303, 280) - (378, 355)
[Mon May 13 14:08:56 2013] XMMSAS bgd. selection expression = annulus(29536.337463, 27599.222778, 1087.500000, 2175.000000, X, Y) && !ellipse(28629.814000, 26469.089400, 2376.640068, 2376.640068, 0.000000, X, Y) && !ellipse(29265.214000, 26326.130000, 429.708812, 429.708812, 0.000000, X, Y) && !ellipse(29133.076000, 26254.420000, 1275.840037, 1275.840037, 0.000000, X, Y) && !ellipse(28890.324000, 27290.384000, 1064.856031, 1064.856031, 0.000000, X, Y) && !ellipse(29730.372000, 26468.354000, 1964.584057, 1964.584057, 0.000000, X, Y) && !ellipse(27612.139496, 27515.753967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.974200, 25704.930000, 1220.856035, 1220.856035, 0.000000, X, Y) && !ellipse(26978.222000, 27385.472000, 1157.440033, 1157.440033, 0.000000, X, Y) && !ellipse(26666.818970, 26145.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.828000, 28114.280000, 1184.056034, 1184.056034, 0.000000, X, Y) && !ellipse(29607.712616, 25562.698486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.610657, 25464.462402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.181702, 28215.725891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.412537, 26054.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31120.060000, 25554.416000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(28353.134277, 28815.714722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29526.936005, 28319.078217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.526550, 25033.152893, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30.gif
[Mon May 13 14:10:49 2013] Mean detx,y = (1334.04, 1372.83) 
[Mon May 13 14:10:50 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:11:00 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:11:00 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon May 13 14:11:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon May 13 16:31:59 2013] Not generating rmf since there are only 47 counts
[Mon May 13 16:31:59 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:48 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:48 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 453.00
[Mon May 13 16:33:48 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 152.00
[Mon May 13 16:33:48 2013] Got source and background scale factors 1265672.000000, 2529400.000000
[Mon May 13 16:33:48 2013] User source parameters:
  Position = (340.1, 317.8) = 23 37 34.65 0 16 56.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 376.9 +/- 22.3
  Background aperture counts = 76.1
  Rate = 0.03 +/- 0.002

[Mon May 13 16:33:48 2013] Updating counts from extracted products
[Mon May 13 16:33:48 2013] Set source signif. to 376.94/8.72 = 43.22
[Mon May 13 16:33:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:50 2013] Using photon index=1.80, rate=0.0282, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30.arf
[Mon May 13 16:33:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:50 2013] Updating source flux to 2.9e-13
[Mon May 13 16:33:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete