[Mon May 13 14:06:50 2013] Detection parameters:
  Position = (337.0, 303.1) = 23 37 35.53 0 15 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 366.3 +/- 24.5
  Background counts = 13.0
  Rate = 0.03 +/- 0.002

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 2.82'
[Mon May 13 14:07:23 2013] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 7.84"
[Mon May 13 14:07:23 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.755
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.84"
[Mon May 13 14:07:23 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 13 14:07:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src2.csv
[Mon May 13 14:07:23 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 13 14:07:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src2.csv
[Mon May 13 14:07:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:25 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 13 14:07:25 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 13 14:07:25 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May 13 14:07:53 2013] Spatial fit model total counts = 1429.990000, observed total counts = 1433.000000
[Mon May 13 14:07:53 2013] Offset between fit and detection position for source 3 = 0.109739 pixels
[Mon May 13 14:07:53 2013] 1320.382000 total counts/ 1188.700000 bgd. counts: snr = 3.819357
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.109739 pixels
  Position = (337.0, 303.2) = 23 37 35.54 0 15 56.1
  Extent = 5.1 (3.9-6.3)", rotation angle = 0
  Source counts = 131.7 +/- 36.3
  Background counts = 1188.7
  Rate = 0.01 +/- 0.003
[Mon May 13 14:07:53 2013] Spatial fit model total counts = 1013.430000, observed total counts = 1011.000000
[Mon May 13 14:07:53 2013] Offset between fit and detection position for source 3 = 0.101413 pixels
[Mon May 13 14:07:53 2013] Warning, changing simple spatial fit ID from 2 to 7
[Mon May 13 14:07:53 2013] 952.854000 total counts/ 834.840000 bgd. counts: snr = 4.084434
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.101413 pixels
  Position = (336.9, 303.2) = 23 37 35.55 0 15 55.7
  Extent = 5.4 (3.6-8.6)", rotation angle = 0
  Source counts = 118.0 +/- 30.9
  Background counts = 834.8
  Rate = 0.009 +/- 0.002
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:07:53 2013] Source is confused with source 1
[Mon May 13 14:08:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 5.37"
[Mon May 13 14:08:13 2013] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.329
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.37"
[Mon May 13 14:08:13 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 13 14:08:13 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 13 14:08:13 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 13 14:08:14 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 13 14:08:32 2013] Warning, spatial fit 2 centroid is now closest to src. 2
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:55 2013] XMMSAS src. selection expression = ellipse(29265.214000, 26326.130000, 322.281609, 322.281609, 0.000000, X, Y)
[Mon May 13 14:08:55 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src.reg
[Mon May 13 14:08:55 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (318, 285) - (355, 322)
[Mon May 13 14:08:55 2013] XMMSAS bgd. selection expression = annulus(29265.214000, 26326.130000, 537.136015, 1074.272031, X, Y) && !ellipse(28629.814000, 26469.089400, 2376.640068, 2376.640068, 0.000000, X, Y) && !ellipse(29133.076000, 26254.420000, 1275.840037, 1275.840037, 0.000000, X, Y) && !ellipse(28890.324000, 27290.384000, 1064.856031, 1064.856031, 0.000000, X, Y) && !ellipse(29730.372000, 26468.354000, 1964.584057, 1964.584057, 0.000000, X, Y) && !ellipse(27612.139496, 27515.753967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.974200, 25704.930000, 1220.856035, 1220.856035, 0.000000, X, Y) && !ellipse(27069.828000, 28114.280000, 1184.056034, 1184.056034, 0.000000, X, Y) && !ellipse(30620.689800, 24806.209400, 501.651214, 501.651214, 0.000000, X, Y) && !ellipse(29607.712616, 25562.698486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.181702, 28215.725891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.337463, 27599.222778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.412537, 26054.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31120.060000, 25554.416000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(28661.526550, 25033.152893, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:55 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3.gif
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/events/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0042341301/products/events/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 13 14:08:57 2013] Mean detx,y = (191.52, 1594.35) 
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/images/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0042341301/products/images/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/spectra/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0042341301/products/spectra/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 13 14:08:57 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 13 14:08:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 13 14:08:57 2013] ../../xmm0042341301/products/lightcurves/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0042341301/products/lightcurves/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 13 16:33:45 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:45 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 331.00
[Mon May 13 16:33:45 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 0.00
[Mon May 13 16:33:45 2013] Got source and background scale factors 332800.000000, 0.000000
[Mon May 13 16:33:45 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon May 13 16:33:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:49 2013] Using photon index=1.80, rate=0.00883, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3.arf
[Mon May 13 16:33:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:49 2013] Updating source flux to 1.1e-13
[Mon May 13 16:33:57 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete