[Mon May 13 14:06:51 2013] Detection parameters:
  Position = (314.0, 320.9) = 23 37 42.22 0 17 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.9 +/- 12.6
  Background counts = 10.7
  Rate = 0.006 +/- 0.001

[Mon May 13 14:06:52 2013] Off-axis axis estimate = 1.98'
[Mon May 13 14:07:23 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:07:23 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Mon May 13 14:07:23 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Mon May 13 14:07:23 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.42"
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src17.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src17.csv
[Mon May 13 14:07:24 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon May 13 14:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src17.csv
[Mon May 13 14:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 14:07:25 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon May 13 14:07:25 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon May 13 14:07:25 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon May 13 14:07:53 2013] Spatial fit model total counts = 928.884000, observed total counts = 929.000000
[Mon May 13 14:07:53 2013] Offset between fit and detection position for source 27 = 3.043762 pixels
[Mon May 13 14:07:53 2013] Warning, changing simple spatial fit ID from 17 to 8
[Mon May 13 14:07:53 2013] 907.573000 total counts/ 857.207000 bgd. counts: snr = 1.720262
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 3.043762 pixels
  Position = (312.0, 323.2) = 23 37 42.80 0 17 23.0
  Extent = 12.2 (7.0-14.8)", rotation angle = 0
  Source counts = 50.4 +/- 30.1
  Background counts = 857.2
  Rate = 0.004 +/- 0.002
[Mon May 13 14:07:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:07:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:07:53 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:07:53 2013] Source does appear to be extended
[Mon May 13 14:07:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:07:53 2013] Source is confused with source 14
[Mon May 13 14:07:53 2013] Source is confused with source 25
[Mon May 13 14:08:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 14:08:13 2013] Initial guess for spatial extent in simple fitting = 12.21"
[Mon May 13 14:08:13 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.961
[Mon May 13 14:08:13 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.21"
[Mon May 13 14:08:13 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 13 14:08:14 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_src15 appears to have run properly
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 13 14:08:14 2013] fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 13 14:08:14 2013] Fit fullrun_mos1_xmm0042341301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon May 13 14:08:32 2013] Spatial fit model total counts = 931.797000, observed total counts = 929.000000
[Mon May 13 14:08:32 2013] Offset between fit and detection position for source 27 = 0.552836 pixels
[Mon May 13 14:08:32 2013] Warning, changing simple spatial fit ID from 15 to 7
[Mon May 13 14:08:32 2013] 907.072500 total counts/ 839.192000 bgd. counts: snr = 2.343227
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.552836 pixels
  Position = (311.7, 323.7) = 23 37 42.87 0 17 25.1
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source counts = 67.9 +/- 30.1
  Background counts = 839.2
  Rate = 0.005 +/- 0.002
[Mon May 13 14:08:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 14:08:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 14:08:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 14:08:32 2013] Source does appear to be extended
[Mon May 13 14:08:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 14:08:56 2013] XMMSAS src. selection expression = ellipse(27069.828000, 28114.280000, 888.042026, 888.042026, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Not overwriting source region fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27_src.reg
[Mon May 13 14:08:56 2013] Extracting stamp from image fullrun_mos1_xmm0042341301_pi300-10000_cl_sm2.00.img.gz, (261, 273) - (363, 375)
[Mon May 13 14:08:56 2013] XMMSAS bgd. selection expression = annulus(27069.828000, 28114.280000, 1480.070043, 2960.140085, X, Y) && !ellipse(28629.814000, 26469.089400, 2376.640068, 2376.640068, 0.000000, X, Y) && !ellipse(29265.214000, 26326.130000, 429.708812, 429.708812, 0.000000, X, Y) && !ellipse(29133.076000, 26254.420000, 1275.840037, 1275.840037, 0.000000, X, Y) && !ellipse(28890.324000, 27290.384000, 1064.856031, 1064.856031, 0.000000, X, Y) && !ellipse(29730.372000, 26468.354000, 1964.584057, 1964.584057, 0.000000, X, Y) && !ellipse(27612.139496, 27515.753967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.974200, 25704.930000, 1220.856035, 1220.856035, 0.000000, X, Y) && !ellipse(26978.222000, 27385.472000, 1157.440033, 1157.440033, 0.000000, X, Y) && !ellipse(26666.818970, 26145.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29607.712616, 25562.698486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.610657, 25464.462402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26281.571564, 26582.853668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.181702, 28215.725891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.337463, 27599.222778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.412537, 26054.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31120.060000, 25554.416000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(28353.134277, 28815.714722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29526.936005, 28319.078217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.266754, 27845.349304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.526550, 25033.152893, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 14:08:56 2013] Writing fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27.gif
[Mon May 13 14:08:59 2013] Mean detx,y = (924.51, -921.05) 
[Mon May 13 14:09:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 14:09:12 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 14:09:12 2013] Setting source spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 13 14:09:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May 13 16:31:04 2013] Not generating rmf since there are only 67 counts
[Mon May 13 16:31:04 2013] rmf not generated due to insufficient counts
[Mon May 13 16:33:47 2013] Updating aperture counts using extracted products
[Mon May 13 16:33:47 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 570.00
[Mon May 13 16:33:47 2013] Total counts from fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 486.00
[Mon May 13 16:33:47 2013] Got source and background scale factors 2430000.000000, 9158432.000000
[Mon May 13 16:33:47 2013] User source parameters:
  Position = (311.7, 323.7) = 23 37 42.87 0 17 25.1
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source aperture counts = 441.0 +/- 24.9
  Background aperture counts = 129.0
  Rate = 0.03 +/- 0.002

[Mon May 13 16:33:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:33:50 2013] Using photon index=1.80, rate=0.00508, arf fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27.arf
[Mon May 13 16:33:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:33:50 2013] Updating source flux to 4.9e-14
[Mon May 13 16:33:57 2013] Flag c found in src. 27 procflags, skipping spectral fitting
[Mon May 13 16:33:57 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:34:01 2013] xmm0042341301/analysis//spectral/fullrun_mos1_xmm0042341301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete