[Tue Jun 12 01:32:19 2012] Detection parameters:
  Position = (307.9, 319.0) = 11 31 54.39 -19 55 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1841.3 +/- 52.7
  Background counts = 23.5
  Rate = 0.2 +/- 0.006

[Tue Jun 12 01:32:20 2012] Off-axis axis estimate = 1.64'
[Tue Jun 12 01:33:30 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 01:33:30 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jun 12 01:33:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Jun 12 01:33:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jun 12 02:25:45 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 02:25:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 02:25:45 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 02:25:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 02:25:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 02:25:45 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 02:25:45 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 02:25:45 2012] Fit fullrun_pn_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 03:44:39 2012] Spatial fit model total counts = 5002.010000, observed total counts = 5002.000000
[Tue Jun 12 03:44:39 2012] Offset between fit and detection position for source 1 = 0.247828 pixels
[Tue Jun 12 03:44:39 2012] 4827.310000 total counts/ 3310.870000 bgd. counts: snr = 26.354463
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.247828 pixels
  Position = (307.7, 319.2) = 11 31 54.44 -19 55 42.5
  Extent = 11.7 (10.7-12.8)", rotation angle = 0
  Source counts = 1516.4 +/- 69.5
  Background counts = 3310.9
  Rate = 0.2 +/- 0.007
[Tue Jun 12 03:44:39 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 03:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 03:44:39 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 03:44:39 2012] Source does appear to be extended
[Tue Jun 12 03:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 03:44:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 03:44:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 03:44:52 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Tue Jun 12 03:44:52 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890
[Tue Jun 12 03:44:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.66"
[Tue Jun 12 04:27:26 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 04:27:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 04:27:26 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 04:27:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 04:27:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 04:27:26 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 04:27:26 2012] fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 04:27:26 2012] Fit fullrun_pn_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 05:37:32 2012] Warning, spatial fit 1 centroid is now closest to src. 23
[Tue Jun 12 05:37:32 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 05:37:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 05:37:32 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 05:37:32 2012] Source does appear to be extended
[Tue Jun 12 05:37:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 05:37:43 2012] Counts = 1516.440000, rescaling region sizes by 2.000000
[Tue Jun 12 05:37:43 2012] XMMSAS src. selection expression = ellipse(26722.918000, 27721.914000, 1398.840040, 1398.840040, 0.000000, X, Y)
[Tue Jun 12 05:37:43 2012] Writing source region out to fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 05:37:43 2012] Extracting stamp from image fullrun_pn_xmm0042341001_pi300-10000_cl_sm2.00.img.gz, (227, 239) - (388, 400)
[Tue Jun 12 05:37:43 2012] XMMSAS bgd. selection expression = annulus(26722.918000, 27721.914000, 4662.800134, 9325.600268, X, Y) && !ellipse(20576.627280, 28146.225000, 434.237612, 434.237612, 0.000000, X, Y) && !ellipse(34148.343719, 23836.995819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34006.612946, 23585.689331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.987274, 29587.258270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29988.621704, 29872.373901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26412.995760, 30813.100200, 516.896815, 516.896815, 0.000000, X, Y) && !ellipse(21323.159653, 29613.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25565.111908, 29111.909790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.608002, 28791.702637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24856.399628, 26923.531097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28036.412349, 25072.768604, 628.071917, 412.103782, 49.551508, X, Y) && !ellipse(22627.404297, 24808.441833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23461.062256, 32962.939514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.456360, 32163.433197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.983032, 30055.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28155.708954, 28128.696686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24548.174622, 30835.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27464.150818, 30477.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23222.514400, 32536.970000, 1471.664042, 1471.664042, 0.000000, X, Y) && !ellipse(27025.914337, 30999.951569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25126.336456, 29788.711273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28013.465759, 29433.840057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.510345, 27443.815948, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 05:37:43 2012] Writing fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 05:37:48 2012] Mean detx,y = (329.88, 270.21) 
[Tue Jun 12 05:37:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 05:39:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 05:39:34 2012] Setting source spectrum file to fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 05:39:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 08:13:22 2012] Updating aperture counts using extracted products
[Tue Jun 12 08:13:22 2012] Error reading totcts from fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 08:13:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 08:13:22 2012] Using photon index=1.80, rate=0.152, arf fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 08:13:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 08:13:22 2012] Updating source flux to 3.3e-13
[Tue Jun 12 08:14:31 2012] Reading fit data from xmm0042341001/analysis//spectral/fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 08:14:31 2012] Spectral fit parameter nH value = 8.73918e+20
[Tue Jun 12 08:14:31 2012] Spectral fit parameter PhoIndex value = 1.8259
[Tue Jun 12 08:14:31 2012] Failed to get F(0.3-8.0) from xmm0042341001/analysis//spectral/fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 08:14:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 08:14:31 2012] Using Nh = 8.7e+20, photon index=1.83, rate=0.152, arf fullrun_pn_xmm0042341001_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 08:14:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 08:14:31 2012] Updating source flux to 4e-13