[Tue Jun 12 01:32:50 2012] Detection parameters:
  Position = (306.5, 317.9) = 11 31 54.82 -19 55 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 805.9 +/- 34.6
  Background counts = 27.0
  Rate = 0.06 +/- 0.003

[Tue Jun 12 01:32:50 2012] Off-axis axis estimate = 1.53'
[Tue Jun 12 03:18:00 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 03:18:00 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Jun 12 03:18:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.078
[Tue Jun 12 03:18:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Tue Jun 12 03:44:33 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 03:44:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 03:44:33 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 03:44:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 03:44:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 03:44:34 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 03:44:34 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 03:44:34 2012] Fit fullrun_mos2_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 03:44:45 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Tue Jun 12 03:44:45 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 03:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 03:44:45 2012] Assessing source extent using major
[Tue Jun 12 03:44:45 2012] Source does appear to be extended
[Tue Jun 12 03:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 03:44:45 2012] Source is confused with source 3
[Tue Jun 12 05:16:35 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 05:16:35 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Jun 12 05:16:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.078
[Tue Jun 12 05:16:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.19"
[Tue Jun 12 05:37:28 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 05:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 05:37:28 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 05:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 05:37:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 05:37:28 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 05:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 05:37:28 2012] fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 05:37:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 12 05:37:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 05:37:37 2012] Spatial fit model total counts = 2373.950000, observed total counts = 2140.000000
[Tue Jun 12 05:37:37 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 05:37:37 2012] Spatial fit model total counts = 1625.860000, observed total counts = 1622.000000
[Tue Jun 12 05:37:37 2012] Offset between fit and detection position for source 2 = 7.105781 pixels
[Tue Jun 12 05:37:37 2012] Warning, changing simple spatial fit ID from 1 to 7
[Tue Jun 12 05:37:37 2012] 1670.321000 total counts/ 1360.050000 bgd. counts: snr = 8.413249
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.105781 pixels
  Position = (301.4, 312.9) = 11 31 56.38 -19 56 9.7
  Extent = 18.7 (13.5-29.8)", rotation angle = 0
  Source counts = 310.3 +/- 40.9
  Background counts = 1360.0
  Rate = 0.02 +/- 0.003
[Tue Jun 12 05:37:37 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 05:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 05:37:37 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 05:37:37 2012] Source does appear to be extended
[Tue Jun 12 05:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 07:41:25 2012] XMMSAS src. selection expression = ellipse(26173.932000, 27177.110000, 1123.224032, 1123.224032, 0.000000, X, Y)
[Tue Jun 12 07:41:25 2012] Writing source region out to fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 12 07:41:25 2012] Extracting stamp from image fullrun_mos2_xmm0042341001_pi300-10000_cl_sm2.00.img.gz, (237, 248) - (366, 377)
[Tue Jun 12 07:41:25 2012] XMMSAS bgd. selection expression = annulus(26173.932000, 27177.110000, 1872.040054, 3744.080108, X, Y) && !ellipse(27183.466431, 27728.599701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26375.156036, 29283.191040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.776000, 24754.556600, 298.848163, 298.848163, 0.000000, X, Y) && !ellipse(25184.552000, 28447.430000, 1751.952050, 1751.952050, 0.000000, X, Y) && !ellipse(29933.922600, 29865.737760, 329.924009, 329.924009, 0.000000, X, Y) && !ellipse(27321.478000, 28911.964000, 1196.928034, 1196.928034, 0.000000, X, Y) && !ellipse(25642.492737, 25886.304077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.698547, 30914.340149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.906311, 29961.136841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28027.599800, 25080.313400, 592.457396, 592.457396, 0.000000, X, Y) && !ellipse(24387.814000, 28926.232400, 1221.112035, 1221.112035, 0.000000, X, Y)
[Tue Jun 12 07:41:25 2012] Writing fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2.gif
[Tue Jun 12 07:41:27 2012] Mean detx,y = (219.17, -571.85) 
[Tue Jun 12 07:41:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 07:41:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 07:41:34 2012] Setting source spectrum file to fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 07:41:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 12 08:13:23 2012] Updating aperture counts using extracted products
[Tue Jun 12 08:13:23 2012] Error reading totcts from fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 08:13:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 08:13:23 2012] Using photon index=1.80, rate=0.0238, arf fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2.arf
[Tue Jun 12 08:13:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 08:13:23 2012] Updating source flux to 2.3e-13
[Tue Jun 12 08:13:53 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Tue Jun 12 08:13:53 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Jun 12 08:14:15 2012] Reading fit data from xmm0042341001/analysis//spectral/fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jun 12 08:14:15 2012] Spectral fit parameter nH value = 1.25145e+21
[Tue Jun 12 08:14:15 2012] Spectral fit parameter PhoIndex value = 1.96537
[Tue Jun 12 08:14:15 2012] Failed to get F(0.3-8.0) from xmm0042341001/analysis//spectral/fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 08:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 08:14:15 2012] Using Nh = 1.3e+21, photon index=1.97, rate=0.0238, arf fullrun_mos2_xmm0042341001_pi300-10000_pass1_cl_src2.arf
[Tue Jun 12 08:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 08:14:15 2012] Updating source flux to 2.4e-13