[Tue Jun 12 01:32:35 2012] Detection parameters:
  Position = (307.2, 319.0) = 11 31 54.59 -19 55 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 937.6 +/- 38.1
  Background counts = 18.0
  Rate = 0.07 +/- 0.003

[Tue Jun 12 01:32:36 2012] Off-axis axis estimate = 1.62'
[Tue Jun 12 02:25:45 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 02:25:45 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jun 12 02:25:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Tue Jun 12 02:25:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Jun 12 03:17:59 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 03:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 03:17:59 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 03:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 03:17:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 03:18:00 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 03:18:00 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 03:18:00 2012] Fit fullrun_mos1_xmm0042341001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 03:44:43 2012] Spatial fit model total counts = 2321.960000, observed total counts = 2319.000000
[Tue Jun 12 03:44:43 2012] Offset between fit and detection position for source 2 = 0.534830 pixels
[Tue Jun 12 03:44:43 2012] 2253.304000 total counts/ 1553.900000 bgd. counts: snr = 17.742572
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.534830 pixels
  Position = (307.7, 319.3) = 11 31 54.45 -19 55 42.0
  Extent = 11.3 (10.0-12.8)", rotation angle = 0
  Source counts = 699.4 +/- 47.5
  Background counts = 1553.9
  Rate = 0.05 +/- 0.004
[Tue Jun 12 03:44:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 03:44:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 03:44:43 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 03:44:43 2012] Source does appear to be extended
[Tue Jun 12 03:44:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 03:44:43 2012] Source is confused with source 6
[Tue Jun 12 04:27:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 04:27:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 04:27:27 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Tue Jun 12 04:27:27 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Tue Jun 12 04:27:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.31"
[Tue Jun 12 05:16:34 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 05:16:34 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 05:16:34 2012] Fit fullrun_mos1_xmm0042341001_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jun 12 05:16:34 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 05:16:34 2012] fullrun_mos1_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 05:16:35 2012] Fit fullrun_mos1_xmm0042341001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 05:37:35 2012] Spatial fit model total counts = 3177.530000, observed total counts = 3174.000000
[Tue Jun 12 05:37:35 2012] Offset between fit and detection position for source 2 = 0.613833 pixels
[Tue Jun 12 05:37:35 2012] 3099.960000 total counts/ 2096.950000 bgd. counts: snr = 21.903384
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.613833 pixels
  Position = (307.3, 318.8) = 11 31 54.57 -19 55 44.0
  Extent = 13.9 (12.8-16.3)", rotation angle = 0
  Source counts = 1003.0 +/- 55.7
  Background counts = 2096.9
  Rate = 0.08 +/- 0.004
[Tue Jun 12 05:37:35 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 05:37:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 05:37:35 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 05:37:35 2012] Source does appear to be extended
[Tue Jun 12 05:37:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 06:41:55 2012] Counts = 1003.010000, rescaling region sizes by 2.000000
[Tue Jun 12 06:41:55 2012] XMMSAS src. selection expression = ellipse(26685.124980, 27690.655600, 1669.644048, 1669.644048, 0.000000, X, Y)
[Tue Jun 12 06:41:55 2012] Writing source region out to fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 12 06:41:55 2012] Extracting stamp from image fullrun_mos1_xmm0042341001_pi300-10000_cl_sm2.00.img.gz, (211, 223) - (403, 415)
[Tue Jun 12 06:41:55 2012] XMMSAS bgd. selection expression = annulus(26685.124980, 27690.655600, 5565.480160, 11130.960320, X, Y) && !ellipse(34057.542740, 23723.870400, 349.889610, 349.889610, 0.000000, X, Y) && !ellipse(20542.247200, 28151.407600, 365.416811, 365.416811, 0.000000, X, Y) && !ellipse(29922.730600, 29826.289200, 426.998412, 426.998412, 0.000000, X, Y) && !ellipse(27046.132000, 28550.152000, 1254.072036, 1254.072036, 0.000000, X, Y) && !ellipse(25635.918884, 26055.989655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26454.270599, 29578.709076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25157.156000, 30270.868000, 1275.256037, 1275.256037, 0.000000, X, Y) && !ellipse(27085.567535, 29350.448242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15336.869600, 31234.053400, 462.868813, 462.868813, 0.000000, X, Y) && !ellipse(25965.673523, 29995.912415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23350.522620, 32514.524000, 1626.296047, 1626.296047, 0.000000, X, Y) && !ellipse(28133.884613, 27999.909180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15141.026200, 25369.764400, 577.604817, 577.604817, 0.000000, X, Y) && !ellipse(23374.409000, 32759.941200, 1498.608043, 1498.608043, 0.000000, X, Y) && !ellipse(27840.772000, 29331.642000, 2508.144072, 2508.144072, 0.000000, X, Y) && !ellipse(27007.188416, 30710.871979, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 06:41:55 2012] Writing fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2.gif
[Tue Jun 12 06:41:57 2012] Mean detx,y = (-135.84, -28.56) 
[Tue Jun 12 06:41:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 06:44:59 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 06:44:59 2012] Setting source spectrum file to fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 06:44:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 12 08:13:23 2012] Updating aperture counts using extracted products
[Tue Jun 12 08:13:23 2012] Error reading totcts from fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 08:13:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 08:13:23 2012] Using photon index=1.80, rate=0.0765, arf fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2.arf
[Tue Jun 12 08:13:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 08:13:23 2012] Updating source flux to 6.5e-13
[Tue Jun 12 08:13:24 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Jun 12 08:13:53 2012] Reading fit data from xmm0042341001/analysis//spectral/fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jun 12 08:13:53 2012] Spectral fit parameter nH value = 7.33266e+20
[Tue Jun 12 08:13:53 2012] Spectral fit parameter PhoIndex value = 1.68579
[Tue Jun 12 08:13:53 2012] Failed to get F(0.3-8.0) from xmm0042341001/analysis//spectral/fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 08:13:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 08:13:53 2012] Using Nh = 7.3e+20, photon index=1.69, rate=0.0765, arf fullrun_mos1_xmm0042341001_pi300-10000_pass1_cl_src2.arf
[Tue Jun 12 08:13:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 08:13:53 2012] Updating source flux to 7.4e-13