[Wed Sep 28 10:11:43 2011] Detection parameters:
  Position = (294.0, 264.2) = 5 28 53.19 -39 28 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 647.6 +/- 32.1
  Background counts = 29.0
  Rate = 0.1 +/- 0.005

[Wed Sep 28 10:11:44 2011] Off-axis axis estimate = 2.51'
[Wed Sep 28 10:13:30 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 10:13:30 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Sep 28 10:13:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed Sep 28 10:13:30 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.68"
[Wed Sep 28 11:20:41 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Sep 28 11:20:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_src3.csv
[Wed Sep 28 11:20:41 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Sep 28 11:20:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_src3.csv
[Wed Sep 28 11:20:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 11:20:41 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 11:20:41 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 11:20:41 2011] Fit fullrun_pn_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 13:12:29 2011] Spatial fit model total counts = 2431.900000, observed total counts = 2428.000000
[Wed Sep 28 13:12:29 2011] Offset between fit and detection position for source 3 = 7.688698 pixels
[Wed Sep 28 13:12:29 2011] 2585.954000 total counts/ 2280.430000 bgd. counts: snr = 6.397893
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 7.688698 pixels
  Position = (288.1, 259.2) = 5 28 55.40 -39 29 13.5
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 305.5 +/- 50.9
  Background counts = 2280.4
  Rate = 0.05 +/- 0.008
[Wed Sep 28 13:12:29 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:29 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:12:29 2011] Source does appear to be extended
[Wed Sep 28 13:12:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:12:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:12:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 13:12:42 2011] Initial guess for spatial extent in simple fitting = 15.36"
[Wed Sep 28 13:12:42 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.984
[Wed Sep 28 13:12:42 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 15.36"
[Wed Sep 28 14:00:27 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Sep 28 14:00:27 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_src3.csv
[Wed Sep 28 14:00:27 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Sep 28 14:00:27 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_src3.csv
[Wed Sep 28 14:00:27 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 14:00:28 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 14:00:28 2011] fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 14:00:28 2011] Fit fullrun_pn_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 15:25:58 2011] Warning, spatial fit 3 centroid is now closest to src. 35
[Wed Sep 28 15:25:58 2011] Source 3 is offset by -2.103540 and 3.567839 pixels which is larger than
2 X fitted extent = 2.340727 x 2.340727, not incorporating fit results
[Wed Sep 28 15:25:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:25:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:25:58 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:25:58 2011] Source does appear to be extended
[Wed Sep 28 15:25:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:26:12 2011] XMMSAS src. selection expression = ellipse(25017.514000, 22501.322000, 921.810027, 921.810027, 0.000000, X, Y)
[Wed Sep 28 15:26:12 2011] Writing source region out to fullrun_pn_xmm0042340801_pi300-10000_pass1_cl_src3_src.reg
[Wed Sep 28 15:26:12 2011] Extracting stamp from image fullrun_pn_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (235, 206) - (341, 312)
[Wed Sep 28 15:26:12 2011] XMMSAS bgd. selection expression = annulus(25017.514000, 22501.322000, 1536.350044, 3072.700088, X, Y) && !ellipse(24462.088800, 24049.951800, 447.878413, 447.878413, 0.000000, X, Y) && !ellipse(25609.500600, 23715.622800, 688.791220, 688.791220, 0.000000, X, Y) && !ellipse(23603.169000, 22333.705400, 436.628013, 436.628013, 0.000000, X, Y) && !ellipse(26122.131744, 25946.828125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.304382, 25344.786957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.316010, 25177.745789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27565.225128, 24801.209534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26734.474400, 21644.918000, 1270.792037, 1270.792037, 0.000000, X, Y) && !ellipse(25479.054443, 21462.790298, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 15:26:12 2011] Writing fullrun_pn_xmm0042340801_pi300-10000_pass1_cl_src3.gif
[Wed Sep 28 15:27:45 2011] Mean detx,y = (-290.98, -1741.11) 
[Wed Sep 28 15:27:47 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 15:28:09 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 15:28:10 2011] Setting source spectrum file to fullrun_pn_xmm0042340801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 15:28:10 2011] Setting bgd. spectrum file to fullrun_pn_xmm0042340801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Sep 28 16:58:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:29 2011] Error reading totcts from fullrun_pn_xmm0042340801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 16:58:29 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:29 2011] Using photon index=1.80, rate=0.0466, arf fullrun_pn_xmm0042340801_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 16:58:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:29 2011] Updating source flux to 1.3e-13
[Wed Sep 28 16:59:15 2011] Flag b found in src. 3 procflags, skipping spectral fitting