[Wed Sep 28 10:12:31 2011] Detection parameters:
  Position = (274.0, 271.2) = 5 29 0.69 -39 28 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.3 +/- 13.3
  Background counts = 29.8
  Rate = 0.005 +/- 0.001

[Wed Sep 28 10:12:32 2011] Off-axis axis estimate = 2.65'
[Wed Sep 28 12:12:15 2011] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:12:15 2011] Initial guess for spatial extent in simple fitting = 7.76"
[Wed Sep 28 12:12:15 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Wed Sep 28 12:12:15 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 7.76"
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src16.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src16.csv
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src16.csv
[Wed Sep 28 13:12:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Sep 28 13:12:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:12:35 2011] Spatial fit model total counts = 2804.790000, observed total counts = 2802.000000
[Wed Sep 28 13:12:35 2011] Offset between fit and detection position for source 18 = 0.165246 pixels
[Wed Sep 28 13:12:35 2011] Warning, changing simple spatial fit ID from 16 to 1
[Wed Sep 28 13:12:35 2011] 2906.390001 total counts/ 2906.390000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.165246 pixels
  Position = (274.2, 271.2) = 5 29 0.63 -39 28 21.3
  Extent = 1.9" x 1.9", rotation angle = 0
  Source counts = 0.0 +/- 53.9
  Background counts = 2906.4
  Rate = 1e-10 +/- 0.005
  Deleting source due to low Poisson probability