[Wed Sep 28 10:12:31 2011] Detection parameters:
  Position = (275.9, 285.0) = 5 28 59.98 -39 27 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.0 +/- 11.8
  Background counts = 30.3
  Rate = 0.005 +/- 0.001

[Wed Sep 28 10:12:32 2011] Off-axis axis estimate = 1.90'
[Wed Sep 28 12:12:15 2011] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:12:15 2011] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Sep 28 12:12:15 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.622
[Wed Sep 28 12:12:15 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 7.38"
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src14.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src14.csv
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src14.csv
[Wed Sep 28 13:12:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Sep 28 13:12:21 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Sep 28 13:12:35 2011] Warning, spatial fit 14 centroid is now closest to src. 1
[Wed Sep 28 13:12:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:35 2011] Assessing source extent using major
[Wed Sep 28 13:12:35 2011] Source does appear to be extended
[Wed Sep 28 13:12:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 14:38:31 2011] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:38:31 2011] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Sep 28 14:38:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.622
[Wed Sep 28 14:38:31 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 7.38"
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src13.ximg exists
[Wed Sep 28 15:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src13.csv
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Sep 28 15:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src13.csv
[Wed Sep 28 15:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Sep 28 15:25:52 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Sep 28 15:26:04 2011] Source 16 is offset by -5.635869 and 5.796238 pixels which is larger than
2 X fitted extent = 2.502428 x 2.502428, not incorporating fit results
[Wed Sep 28 15:26:04 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:26:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:26:04 2011] Assessing source extent using major
[Wed Sep 28 15:26:04 2011] Source does appear to be extended
[Wed Sep 28 15:26:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:38:04 2011] XMMSAS src. selection expression = ellipse(23954.507416, 24747.402710, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 16:38:04 2011] Writing source region out to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src16_src.reg
[Wed Sep 28 16:38:04 2011] Extracting stamp from image fullrun_mos2_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (238, 248) - (313, 323)
[Wed Sep 28 16:38:04 2011] XMMSAS bgd. selection expression = annulus(23954.507416, 24747.402710, 1087.500000, 2175.000000, X, Y) && !ellipse(24471.125400, 24061.092000, 378.274411, 378.274411, 0.000000, X, Y) && !ellipse(25615.001600, 23619.786600, 878.536025, 878.536025, 0.000000, X, Y) && !ellipse(23520.589400, 22450.246000, 299.216009, 299.216009, 0.000000, X, Y) && !ellipse(26711.561523, 23896.428650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.570160, 24730.264496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.002655, 22252.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.544400, 25000.704000, 1057.592030, 1057.592030, 0.000000, X, Y) && !ellipse(24632.155853, 24999.540222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25740.760681, 21985.870895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.733032, 23083.811798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25856.440308, 25484.186615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.288605, 23039.650696, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 16:38:04 2011] Writing fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src16.gif
[Wed Sep 28 16:42:55 2011] Mean detx,y = (-677.50, -304.51) 
[Wed Sep 28 16:42:56 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 16:43:05 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 16:43:05 2011] Setting source spectrum file to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Sep 28 16:43:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Sep 28 16:57:56 2011] Not generating rmf since there are only 58 counts
[Wed Sep 28 16:57:56 2011] rmf not generated due to insufficient counts
[Wed Sep 28 16:58:30 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:30 2011] Error reading totcts from fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Sep 28 16:58:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:30 2011] Using photon index=1.80, rate=0.00501, arf fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src16.arf
[Wed Sep 28 16:58:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:30 2011] Updating source flux to 4.6e-14
[Wed Sep 28 16:58:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting