[Wed Sep 28 10:12:31 2011] Detection parameters:
  Position = (301.1, 288.9) = 5 28 50.51 -39 27 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.8 +/- 13.0
  Background counts = 29.0
  Rate = 0.005 +/- 0.001

[Wed Sep 28 10:12:32 2011] Off-axis axis estimate = 0.72'
[Wed Sep 28 12:12:15 2011] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:12:15 2011] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Sep 28 12:12:15 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942
[Wed Sep 28 12:12:15 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 6.79"
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src15.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src15.csv
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Sep 28 13:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src15.csv
[Wed Sep 28 13:12:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Sep 28 13:12:21 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Sep 28 13:12:35 2011] Source 13 is offset by 6.356131 and 5.127109 pixels which is larger than
2 X fitted extent = 6.242069 x 6.242069, not incorporating fit results
[Wed Sep 28 13:12:35 2011] Spatial fit model total counts = 479.501000, observed total counts = 480.000000
[Wed Sep 28 13:12:35 2011] Offset between fit and detection position for source 13 = 3.968819 pixels
[Wed Sep 28 13:12:35 2011] Warning, changing simple spatial fit ID from 15 to 21
[Wed Sep 28 13:12:35 2011] 468.864400 total counts/ 419.951000 bgd. counts: snr = 2.386869
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.968819 pixels
  Position = (297.3, 287.9) = 5 28 51.96 -39 27 8.5
  Extent = 13.2 (13.2-26.4)", rotation angle = 0
  Source counts = 48.9 +/- 21.7
  Background counts = 420.0
  Rate = 0.004 +/- 0.002
[Wed Sep 28 13:12:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:12:35 2011] Source does appear to be extended
[Wed Sep 28 13:12:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:12:35 2011] Source is confused with source 12
[Wed Sep 28 14:38:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:38:31 2011] Initial guess for spatial extent in simple fitting = 13.22"
[Wed Sep 28 14:38:31 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Wed Sep 28 14:38:31 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 13.22"
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src14.ximg exists
[Wed Sep 28 15:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src14.csv
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Sep 28 15:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src14.csv
[Wed Sep 28 15:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Sep 28 15:25:52 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Sep 28 15:26:04 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.168130 pixels away
[Wed Sep 28 15:26:04 2011] Spatial fit model total counts = 481.996000, observed total counts = 480.000000
[Wed Sep 28 15:26:04 2011] Offset between fit and detection position for source 13 = 0.007260 pixels
[Wed Sep 28 15:26:04 2011] Warning, changing simple spatial fit ID from 14 to 19
[Wed Sep 28 15:26:04 2011] 464.589100 total counts/ 413.674000 bgd. counts: snr = 2.503326
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.007260 pixels
  Position = (297.3, 287.9) = 5 28 51.96 -39 27 8.5
  Extent = 13.2 (13.2-26.4)", rotation angle = 0
  Source counts = 50.9 +/- 21.6
  Background counts = 413.7
  Rate = 0.005 +/- 0.002
[Wed Sep 28 15:26:04 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:26:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:26:04 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:26:04 2011] Source does appear to be extended
[Wed Sep 28 15:26:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:38:04 2011] XMMSAS src. selection expression = ellipse(25813.544400, 25000.704000, 793.194023, 793.194023, 0.000000, X, Y)
[Wed Sep 28 16:38:04 2011] Writing source region out to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src13_src.reg
[Wed Sep 28 16:38:04 2011] Extracting stamp from image fullrun_mos2_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (252, 242) - (343, 334)
[Wed Sep 28 16:38:04 2011] XMMSAS bgd. selection expression = annulus(25813.544400, 25000.704000, 1321.990038, 2643.980076, X, Y) && !ellipse(24471.125400, 24061.092000, 378.274411, 378.274411, 0.000000, X, Y) && !ellipse(25615.001600, 23619.786600, 878.536025, 878.536025, 0.000000, X, Y) && !ellipse(23520.589400, 22450.246000, 299.216009, 299.216009, 0.000000, X, Y) && !ellipse(26711.561523, 23896.428650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.570160, 24730.264496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.002655, 22252.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23954.507416, 24747.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.155853, 24999.540222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25740.760681, 21985.870895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.733032, 23083.811798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25856.440308, 25484.186615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.288605, 23039.650696, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 16:38:04 2011] Writing fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src13.gif
[Wed Sep 28 16:43:07 2011] Mean detx,y = (1058.48, -552.70) 
[Wed Sep 28 16:43:08 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 16:43:17 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 16:43:17 2011] Setting source spectrum file to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Sep 28 16:43:17 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Sep 28 16:57:58 2011] Not generating rmf since there are only 50 counts
[Wed Sep 28 16:57:58 2011] rmf not generated due to insufficient counts
[Wed Sep 28 16:58:30 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:30 2011] Error reading totcts from fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Sep 28 16:58:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:30 2011] Using photon index=1.80, rate=0.00454, arf fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src13.arf
[Wed Sep 28 16:58:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:30 2011] Updating source flux to 4.6e-14
[Wed Sep 28 16:58:55 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Wed Sep 28 16:58:55 2011] Flag c found in src. 13 procflags, skipping spectral fitting
[Wed Sep 28 16:58:55 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting