[Wed Sep 28 10:12:31 2011] Detection parameters:
  Position = (281.8, 277.0) = 5 28 57.78 -39 27 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3081.1 +/- 65.5
  Background counts = 31.0
  Rate = 0.2 +/- 0.005

[Wed Sep 28 10:12:32 2011] Off-axis axis estimate = 1.97'
[Wed Sep 28 12:12:15 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 12:12:15 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Sep 28 12:12:15 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.618
[Wed Sep 28 12:12:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 13:12:21 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 13:12:21 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 13:12:21 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 13:12:35 2011] Warning, spatial fit 1 centroid is now closest to src. 18
[Wed Sep 28 13:12:35 2011] Spatial fit model total counts = 971.270000, observed total counts = 966.000000
[Wed Sep 28 13:12:35 2011] Offset between fit and detection position for source 1 = 2.180315 pixels
[Wed Sep 28 13:12:35 2011] Warning, changing simple spatial fit ID from 1 to 14
[Wed Sep 28 13:12:35 2011] 951.490000 total counts/ 440.170000 bgd. counts: snr = 24.371517
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.180315 pixels
  Position = (281.5, 279.2) = 5 28 57.87 -39 27 46.4
  Extent = 5.4 (5.0-6.0)", rotation angle = 0
  Source counts = 511.3 +/- 30.8
  Background counts = 440.2
  Rate = 0.05 +/- 0.003
[Wed Sep 28 13:12:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:12:35 2011] Source does appear to be extended
[Wed Sep 28 13:12:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 14:38:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:38:31 2011] Initial guess for spatial extent in simple fitting = 5.43"
[Wed Sep 28 14:38:31 2011] source mask rpix=1.2, npix_max = 12, mask sum = 8, frac = 0.654
[Wed Sep 28 14:38:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 15:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 15:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 15:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 15:25:52 2011] fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 15:25:52 2011] Fit fullrun_mos2_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 15:26:04 2011] Spatial fit model total counts = 2738.520000, observed total counts = 2732.000000
[Wed Sep 28 15:26:04 2011] Offset between fit and detection position for source 1 = 2.114022 pixels
[Wed Sep 28 15:26:04 2011] 2723.464000 total counts/ 966.574000 bgd. counts: snr = 56.510222
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.114022 pixels
  Position = (281.8, 277.1) = 5 28 57.76 -39 27 55.5
  Extent = 4.7 (4.6-4.9)", rotation angle = 0
  Source counts = 1756.9 +/- 52.2
  Background counts = 966.6
  Rate = 0.2 +/- 0.005
[Wed Sep 28 15:26:04 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:26:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:26:04 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:26:04 2011] Source does appear to be extended
[Wed Sep 28 15:26:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:38:04 2011] Counts = 1756.890000, rescaling region sizes by 2.000000
[Wed Sep 28 16:38:04 2011] XMMSAS src. selection expression = ellipse(24471.125400, 24061.092000, 567.411616, 567.411616, 0.000000, X, Y)
[Wed Sep 28 16:38:04 2011] Writing source region out to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 16:38:04 2011] Extracting stamp from image fullrun_mos2_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (249, 245) - (314, 310)
[Wed Sep 28 16:38:04 2011] XMMSAS bgd. selection expression = annulus(24471.125400, 24061.092000, 1891.372054, 3782.744109, X, Y) && !ellipse(25615.001600, 23619.786600, 878.536025, 878.536025, 0.000000, X, Y) && !ellipse(23520.589400, 22450.246000, 299.216009, 299.216009, 0.000000, X, Y) && !ellipse(26711.561523, 23896.428650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.570160, 24730.264496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.002655, 22252.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23954.507416, 24747.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.544400, 25000.704000, 1057.592030, 1057.592030, 0.000000, X, Y) && !ellipse(24632.155853, 24999.540222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25740.760681, 21985.870895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.733032, 23083.811798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25856.440308, 25484.186615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.288605, 23039.650696, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 16:38:04 2011] Writing fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 16:38:06 2011] Mean detx,y = (-240.08, 227.90) 
[Wed Sep 28 16:38:07 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 16:38:18 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 16:38:18 2011] Setting source spectrum file to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 16:38:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 16:58:30 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:30 2011] Error reading totcts from fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 16:58:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:30 2011] Using photon index=1.80, rate=0.157, arf fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 16:58:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:30 2011] Updating source flux to 1.5e-12
[Wed Sep 28 16:59:15 2011] Reading fit data from xmm0042340801/analysis//spectral/fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 16:59:15 2011] Spectral fit parameter nH value = 8521710000.0
[Wed Sep 28 16:59:15 2011] Spectral fit parameter PhoIndex value = 2.0943
[Wed Sep 28 16:59:15 2011] Failed to get F(0.3-8.0) from xmm0042340801/analysis//spectral/fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 16:59:15 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:59:15 2011] Using Nh = 8.5e+09, photon index=2.09, rate=0.157, arf fullrun_mos2_xmm0042340801_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 16:59:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:59:15 2011] Updating source flux to 1.3e-12