[Wed Sep 28 10:12:07 2011] Detection parameters:
  Position = (281.8, 277.0) = 5 28 57.76 -39 27 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3114.0 +/- 67.7
  Background counts = 31.9
  Rate = 0.2 +/- 0.005

[Wed Sep 28 10:12:08 2011] Off-axis axis estimate = 1.96'
[Wed Sep 28 11:20:42 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 11:20:42 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Sep 28 11:20:42 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Wed Sep 28 11:20:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 12:12:15 2011] Fit fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 12:12:15 2011] Fit fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 13:12:32 2011] Spatial fit model total counts = 2903.860000, observed total counts = 2904.000000
[Wed Sep 28 13:12:32 2011] Offset between fit and detection position for source 3 = 0.049111 pixels
[Wed Sep 28 13:12:32 2011] 2916.970000 total counts/ 1213.550000 bgd. counts: snr = 48.898204
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.049111 pixels
  Position = (281.8, 277.1) = 5 28 57.77 -39 27 55.6
  Extent = 5.3" x 4.9", rotation angle = 360
  Source counts = 1703.4 +/- 54.0
  Background counts = 1213.5
  Rate = 0.2 +/- 0.005
[Wed Sep 28 13:12:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:32 2011] Assessing source extent using major
[Wed Sep 28 13:12:32 2011] Source does appear to be extended
[Wed Sep 28 13:12:32 2011] Computing asymmetry using major and minor axis, asym = 1.08
[Wed Sep 28 14:00:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:00:28 2011] Initial guess for spatial extent in simple fitting = 5.11"
[Wed Sep 28 14:00:28 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.071
[Wed Sep 28 14:00:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.11"
[Wed Sep 28 14:38:30 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 14:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 14:38:30 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 14:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 14:38:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 14:38:31 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 14:38:31 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 14:38:31 2011] Fit fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 15:26:01 2011] Spatial fit model total counts = 2963.550000, observed total counts = 2955.000000
[Wed Sep 28 15:26:01 2011] Offset between fit and detection position for source 3 = 0.002468 pixels
[Wed Sep 28 15:26:01 2011] 2964.740000 total counts/ 1260.930000 bgd. counts: snr = 47.981705
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002468 pixels
  Position = (281.8, 277.1) = 5 28 57.77 -39 27 55.6
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1703.8 +/- 54.4
  Background counts = 1260.9
  Rate = 0.2 +/- 0.005
[Wed Sep 28 15:26:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:26:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:26:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:26:01 2011] Source does appear to be extended
[Wed Sep 28 15:26:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:18:17 2011] Counts = 1703.810000, rescaling region sizes by 2.000000
[Wed Sep 28 16:18:17 2011] XMMSAS src. selection expression = ellipse(24467.787980, 24059.156600, 614.600418, 614.600418, 0.000000, X, Y)
[Wed Sep 28 16:18:17 2011] Writing source region out to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3_src.reg
[Wed Sep 28 16:18:17 2011] Extracting stamp from image fullrun_mos1_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (246, 242) - (317, 312)
[Wed Sep 28 16:18:17 2011] XMMSAS bgd. selection expression = annulus(24467.787980, 24059.156600, 2048.668059, 4097.336118, X, Y) && !ellipse(25620.446360, 23593.536800, 914.296026, 914.296026, 0.000000, X, Y) && !ellipse(23601.307040, 22347.638600, 387.476811, 387.476811, 0.000000, X, Y) && !ellipse(24981.950653, 22403.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.877228, 22403.463196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.965118, 25164.199829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23876.653992, 23181.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.852000, 24269.986000, 1127.032032, 1127.032032, 0.000000, X, Y) && !ellipse(26154.008026, 25256.416962, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 16:18:17 2011] Writing fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3.gif
[Wed Sep 28 16:18:19 2011] Mean detx,y = (448.95, 80.69) 
[Wed Sep 28 16:18:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 16:18:33 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 16:18:34 2011] Setting source spectrum file to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 16:18:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Sep 28 16:58:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:29 2011] Error reading totcts from fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 16:58:29 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:29 2011] Using photon index=1.80, rate=0.153, arf fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 16:58:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:29 2011] Updating source flux to 1.5e-12
[Wed Sep 28 16:58:55 2011] Reading fit data from xmm0042340801/analysis//spectral/fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3_pl.csv
[Wed Sep 28 16:58:55 2011] Spectral fit parameter nH value = 2.0214e+13
[Wed Sep 28 16:58:55 2011] Spectral fit parameter PhoIndex value = 2.01032
[Wed Sep 28 16:58:55 2011] Failed to get F(0.3-8.0) from xmm0042340801/analysis//spectral/fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 16:58:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:55 2011] Using Nh = 2e+13, photon index=2.01, rate=0.153, arf fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 16:58:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:55 2011] Updating source flux to 1.3e-12