[Wed Sep 28 10:12:08 2011] Detection parameters:
  Position = (308.7, 284.9) = 5 28 47.68 -39 27 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.9 +/- 12.0
  Background counts = 27.7
  Rate = 0.004 +/- 0.001

[Wed Sep 28 10:12:08 2011] Off-axis axis estimate = 1.23'
[Wed Sep 28 11:20:42 2011] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 11:20:42 2011] Initial guess for spatial extent in simple fitting = 7.04"
[Wed Sep 28 11:20:42 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Wed Sep 28 11:20:42 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 7.04"
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src17.ximg exists
[Wed Sep 28 12:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src17.csv
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Sep 28 12:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src17.csv
[Wed Sep 28 12:12:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Sep 28 12:12:15 2011] Fit fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Sep 28 13:12:32 2011] Spatial fit model total counts = 473.818000, observed total counts = 474.000000
[Wed Sep 28 13:12:32 2011] Offset between fit and detection position for source 20 = 8.285569 pixels
[Wed Sep 28 13:12:32 2011] 464.342000 total counts/ 415.977000 bgd. counts: snr = 2.371355
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 8.285569 pixels
  Position = (302.3, 279.5) = 5 28 50.05 -39 27 45.1
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 48.4 +/- 21.5
  Background counts = 416.0
  Rate = 0.004 +/- 0.002
[Wed Sep 28 13:12:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:32 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:12:32 2011] Source does appear to be extended
[Wed Sep 28 13:12:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 14:00:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:00:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 14:00:28 2011] Initial guess for spatial extent in simple fitting = 14.09"
[Wed Sep 28 14:00:28 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Wed Sep 28 14:00:28 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 14.09"
[Wed Sep 28 14:38:30 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src12.ximg exists
[Wed Sep 28 14:38:30 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Sep 28 14:38:30 2011] Fit fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src12 appears to have run properly
[Wed Sep 28 14:38:31 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Sep 28 14:38:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed Sep 28 14:38:31 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Sep 28 14:38:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed Sep 28 14:38:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 15:26:01 2011] Source 20 is offset by -3.160276 and -2.986322 pixels which is larger than
2 X fitted extent = 1.313641 x 1.313641, not incorporating fit results
[Wed Sep 28 15:26:01 2011] Source 20 is offset by 7.096621 and 6.740851 pixels which is larger than
2 X fitted extent = 6.014483 x 5.153839, not incorporating fit results
[Wed Sep 28 15:26:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:26:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:26:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 15:26:01 2011] Source does appear to be extended
[Wed Sep 28 15:26:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:18:17 2011] XMMSAS src. selection expression = ellipse(26255.852000, 24269.986000, 845.274024, 845.274024, 0.000000, X, Y)
[Wed Sep 28 16:18:17 2011] Writing source region out to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src20_src.reg
[Wed Sep 28 16:18:17 2011] Extracting stamp from image fullrun_mos1_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (254, 231) - (351, 328)
[Wed Sep 28 16:18:17 2011] XMMSAS bgd. selection expression = annulus(26255.852000, 24269.986000, 1408.790041, 2817.580081, X, Y) && !ellipse(24467.787980, 24059.156600, 409.733612, 409.733612, 0.000000, X, Y) && !ellipse(25620.446360, 23593.536800, 914.296026, 914.296026, 0.000000, X, Y) && !ellipse(23601.307040, 22347.638600, 387.476811, 387.476811, 0.000000, X, Y) && !ellipse(24981.950653, 22403.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.877228, 22403.463196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.965118, 25164.199829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23876.653992, 23181.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.008026, 25256.416962, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 16:18:17 2011] Writing fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src20.gif
[Wed Sep 28 16:23:34 2011] Mean detx,y = (460.64, -1474.00) 
[Wed Sep 28 16:23:35 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 16:23:45 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 16:23:45 2011] Setting source spectrum file to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Sep 28 16:23:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Sep 28 16:37:58 2011] Not generating rmf since there are only 48 counts
[Wed Sep 28 16:37:58 2011] rmf not generated due to insufficient counts
[Wed Sep 28 16:58:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:29 2011] Error reading totcts from fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Sep 28 16:58:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:30 2011] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src20.arf
[Wed Sep 28 16:58:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:30 2011] Updating source flux to 4.1e-14
[Wed Sep 28 16:58:31 2011] Flag b found in src. 20 procflags, skipping spectral fitting
[Wed Sep 28 16:58:31 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting