[Wed Sep 28 10:12:07 2011] Detection parameters:
  Position = (287.7, 258.1) = 5 28 55.55 -39 29 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 14.3
  Background counts = 28.5
  Rate = 0.008 +/- 0.001

[Wed Sep 28 10:12:08 2011] Off-axis axis estimate = 3.03'
[Wed Sep 28 11:20:42 2011] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 11:20:42 2011] Initial guess for spatial extent in simple fitting = 7.94"
[Wed Sep 28 11:20:42 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Wed Sep 28 11:20:42 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.94"
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src6.ximg exists
[Wed Sep 28 12:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src6.csv
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Sep 28 12:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src6.csv
[Wed Sep 28 12:12:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep 28 12:12:15 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Sep 28 12:12:15 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep 28 12:12:15 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Sep 28 12:12:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:12:32 2011] Source 11 is offset by 1.521040 and 6.370283 pixels which is larger than
2 X fitted extent = 0.918487 x 0.918487, not incorporating fit results
[Wed Sep 28 13:12:32 2011] Spatial fit model total counts = 210.586000, observed total counts = 597.000000
[Wed Sep 28 13:12:32 2011] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep 28 13:12:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:12:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:12:32 2011] Assessing source extent using major
[Wed Sep 28 13:12:32 2011] Source does appear to be extended
[Wed Sep 28 13:12:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:12:32 2011] Source is confused with source 10
[Wed Sep 28 14:00:28 2011] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:00:28 2011] Initial guess for spatial extent in simple fitting = 7.94"
[Wed Sep 28 14:00:28 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Wed Sep 28 14:00:28 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.94"
[Wed Sep 28 14:38:30 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src6.ximg exists
[Wed Sep 28 14:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src6.csv
[Wed Sep 28 14:38:30 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Sep 28 14:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src6.csv
[Wed Sep 28 14:38:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 14:38:31 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 28 14:38:31 2011] fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 28 14:38:31 2011] Fit fullrun_mos1_xmm0042340801_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 28 15:26:01 2011] Source 11 is offset by -5.211533 and -8.237165 pixels which is larger than
2 X fitted extent = 7.303724 x 7.303724, not incorporating fit results
[Wed Sep 28 15:26:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 15:26:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 15:26:01 2011] Assessing source extent using major
[Wed Sep 28 15:26:01 2011] Source does appear to be extended
[Wed Sep 28 15:26:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:18:17 2011] XMMSAS src. selection expression = ellipse(24981.950653, 22403.290619, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 16:18:17 2011] Writing source region out to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src11_src.reg
[Wed Sep 28 16:18:17 2011] Extracting stamp from image fullrun_mos1_xmm0042340801_pi300-10000_cl_sm2.00.img.gz, (250, 221) - (325, 296)
[Wed Sep 28 16:18:17 2011] XMMSAS bgd. selection expression = annulus(24981.950653, 22403.290619, 1087.500000, 2175.000000, X, Y) && !ellipse(24467.787980, 24059.156600, 409.733612, 409.733612, 0.000000, X, Y) && !ellipse(25620.446360, 23593.536800, 914.296026, 914.296026, 0.000000, X, Y) && !ellipse(23601.307040, 22347.638600, 387.476811, 387.476811, 0.000000, X, Y) && !ellipse(24387.877228, 22403.463196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.965118, 25164.199829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23876.653992, 23181.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.852000, 24269.986000, 1127.032032, 1127.032032, 0.000000, X, Y) && !ellipse(26154.008026, 25256.416962, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 16:18:17 2011] Writing fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src11.gif
[Wed Sep 28 16:22:27 2011] Mean detx,y = (1960.47, -413.82) 
[Wed Sep 28 16:22:28 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 16:22:37 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 16:22:38 2011] Setting source spectrum file to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Sep 28 16:22:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Sep 28 16:37:47 2011] Not generating rmf since there are only 96 counts
[Wed Sep 28 16:37:47 2011] rmf not generated due to insufficient counts
[Wed Sep 28 16:58:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:29 2011] Error reading totcts from fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Sep 28 16:58:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:30 2011] Using photon index=1.80, rate=0.00824, arf fullrun_mos1_xmm0042340801_pi300-10000_pass1_cl_src11.arf
[Wed Sep 28 16:58:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 16:58:30 2011] Updating source flux to 8.1e-14
[Wed Sep 28 16:58:31 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting