[Mon May 27 00:40:17 2013] Detection parameters:
  Position = (310.9, 232.8) = 5 16 37.07 -54 33 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 17.4
  Background counts = 91.2
  Rate = 0.01 +/- 0.002

[Mon May 27 00:40:17 2013] Off-axis axis estimate = 4.85'
[Mon May 27 00:40:53 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:53 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Mon May 27 00:40:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Mon May 27 00:40:53 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.85"
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src21.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src21.csv
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src21.csv
[Mon May 27 00:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:56 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon May 27 00:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May 27 00:40:56 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon May 27 00:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May 27 00:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:10 2013] Warning, spatial fit 21 centroid is now closest to src. 22
[Mon May 27 00:41:10 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:10 2013] Assessing source extent using major
[Mon May 27 00:41:10 2013] Source does appear to be extended
[Mon May 27 00:41:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:40 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:40 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Mon May 27 00:41:40 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Mon May 27 00:41:40 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.85"
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src19.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src19.csv
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src19.csv
[Mon May 27 00:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon May 27 00:41:41 2013] Fit fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon May 27 00:41:52 2013] Source 23 is offset by -5.128099 and 0.777305 pixels which is larger than
2 X fitted extent = 2.000202 x 2.000202, not incorporating fit results
[Mon May 27 00:41:52 2013] Spatial fit model total counts = 289.703000, observed total counts = 268.000000
[Mon May 27 00:41:52 2013] Offset between fit and detection position for source 23 = 2.742612 pixels
[Mon May 27 00:41:52 2013] 294.606100 total counts/ 257.719000 bgd. counts: snr = 2.297742
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.742612 pixels
  Position = (309.1, 230.6) = 5 16 37.94 -54 33 51.3
  Extent = 9.4 (4.4-17.7)", rotation angle = 0
  Source counts = 36.9 +/- 17.2
  Background counts = 257.7
  Rate = 0.01 +/- 0.005
[Mon May 27 00:41:52 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:52 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:52 2013] Source does appear to be extended
[Mon May 27 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:42:19 2013] XMMSAS src. selection expression = ellipse(26846.956600, 20017.378000, 561.315616, 561.315616, 0.000000, X, Y)
[Mon May 27 00:42:19 2013] Not overwriting source region fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src.reg
[Mon May 27 00:42:19 2013] Extracting stamp from image fullrun_pn_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (277, 198) - (341, 263)
[Mon May 27 00:42:19 2013] XMMSAS bgd. selection expression = annulus(26846.956600, 20017.378000, 935.526027, 1871.052054, X, Y) && !ellipse(27872.313782, 21912.406235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.966980, 21527.538498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27186.673706, 21533.821625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.167145, 21601.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.175200, 20977.759800, 1354.208039, 1354.208039, 0.000000, X, Y)
[Mon May 27 00:42:19 2013] Writing fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23.gif
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/events/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0042340701/products/events/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon May 27 00:42:20 2013] Mean detx,y = (1375.18, -3978.18) 
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/images/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src.img and ../../xmm0042340701/products/images/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/spectra/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0042340701/products/spectra/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon May 27 00:42:20 2013] Setting source spectrum file to fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 27 00:42:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/lightcurves/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0042340701/products/lightcurves/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon May 27 00:42:28 2013] Not generating rmf since there are only 36 counts
[Mon May 27 00:42:28 2013] rmf not generated due to insufficient counts
[Mon May 27 00:42:28 2013] fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Mon May 27 01:01:14 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:14 2013] Total counts from fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 158.00
[Mon May 27 01:01:14 2013] Total counts from fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_bgd.pi.gz = 424.00
[Mon May 27 01:01:14 2013] Got source and background scale factors 987200.000000, 4191045.000000
[Mon May 27 01:01:14 2013] User source parameters:
  Position = (309.1, 230.6) = 5 16 37.94 -54 33 51.3
  Extent = 9.4 (4.4-17.7)", rotation angle = 0
  Source aperture counts = 58.1 +/- 13.6
  Background aperture counts = 99.9
  Rate = 0.02 +/- 0.004

[Mon May 27 01:01:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:16 2013] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23.arf
[Mon May 27 01:01:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:16 2013] Updating source flux to 3.4e-14
[Mon May 27 01:01:43 2013] Flag b found in src. 23 procflags, skipping spectral fitting
[Mon May 27 01:01:43 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 01:01:49 2013] xmm0042340701/analysis//spectral/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete