[Mon May 27 00:40:16 2013] Detection parameters:
  Position = (304.2, 340.3) = 5 16 40.43 -54 25 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.7 +/- 15.3
  Background counts = 79.1
  Rate = 0.02 +/- 0.002

[Mon May 27 00:40:17 2013] Off-axis axis estimate = 3.06'
[Mon May 27 00:40:53 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:53 2013] Initial guess for spatial extent in simple fitting = 7.96"
[Mon May 27 00:40:53 2013] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.013
[Mon May 27 00:40:53 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.96"
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src13.csv
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src13.csv
[Mon May 27 00:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 27 00:40:55 2013] Fit fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon May 27 00:41:10 2013] Spatial fit model total counts = 161.572000, observed total counts = 147.000000
[Mon May 27 00:41:10 2013] Offset between fit and detection position for source 15 = 4.638292 pixels
[Mon May 27 00:41:10 2013] 168.983700 total counts/ 66.761700 bgd. counts: snr = 12.510673
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 4.638292 pixels
  Position = (300.2, 337.8) = 5 16 42.40 -54 26 5.0
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 102.2 +/- 13.0
  Background counts = 66.8
  Rate = 0.03 +/- 0.004
[Mon May 27 00:41:10 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:10 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:10 2013] Source does appear to be extended
[Mon May 27 00:41:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 00:41:40 2013] Initial guess for spatial extent in simple fitting = 15.92"
[Mon May 27 00:41:40 2013] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.925
[Mon May 27 00:41:40 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 15.92"
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src12.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src12.csv
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src12.csv
[Mon May 27 00:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 27 00:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:52 2013] Source 15 is offset by -4.252341 and -3.943353 pixels which is larger than
2 X fitted extent = 3.084903 x 9.524845, not incorporating fit results
[Mon May 27 00:41:52 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:52 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:52 2013] Source does appear to be extended
[Mon May 27 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:42:19 2013] XMMSAS src. selection expression = ellipse(26072.254000, 29343.960000, 955.194027, 955.194027, 0.000000, X, Y)
[Mon May 27 00:42:19 2013] Not overwriting source region fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src.reg
[Mon May 27 00:42:19 2013] Extracting stamp from image fullrun_pn_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (245, 283) - (355, 393)
[Mon May 27 00:42:19 2013] XMMSAS bgd. selection expression = annulus(26072.254000, 29343.960000, 1591.990046, 3183.980092, X, Y) && !ellipse(23696.879600, 26731.214720, 326.335151, 326.335151, 0.000000, X, Y)
[Mon May 27 00:42:19 2013] Writing fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15.gif
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/events/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0042340701/products/events/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Mon May 27 00:42:20 2013] Mean detx,y = (-3061.65, 4208.41) 
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/images/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src.img and ../../xmm0042340701/products/images/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/spectra/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0042340701/products/spectra/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Mon May 27 00:42:20 2013] Setting source spectrum file to fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 27 00:42:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/lightcurves/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0042340701/products/lightcurves/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Mon May 27 00:42:28 2013] fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15.rmf exists, delete to re-create
[Mon May 27 00:42:28 2013] fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Mon May 27 01:01:11 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:12 2013] Total counts from fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 210.00
[Mon May 27 01:01:12 2013] Total counts from fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1728.00
[Mon May 27 01:01:12 2013] Got source and background scale factors 2350967.000000, 22100920.000000
[Mon May 27 01:01:12 2013] User source parameters:
  Position = (300.2, 337.8) = 5 16 42.40 -54 26 5.0
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source aperture counts = 26.2 +/- 15.5
  Background aperture counts = 183.8
  Rate = 0.007 +/- 0.004

[Mon May 27 01:01:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:16 2013] Using photon index=1.80, rate=0.0284, arf fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15.arf
[Mon May 27 01:01:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:16 2013] Updating source flux to 9.4e-14
[Mon May 27 01:01:43 2013] Flag b found in src. 15 procflags, skipping spectral fitting
[Mon May 27 01:01:49 2013] xmm0042340701/analysis//spectral/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete