[Mon May 27 00:40:16 2013] Detection parameters:
  Position = (311.2, 265.8) = 5 16 36.90 -54 31 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.3 +/- 20.5
  Background counts = 105.8
  Rate = 0.02 +/- 0.003

[Mon May 27 00:40:17 2013] Off-axis axis estimate = 2.54'
[Mon May 27 00:40:53 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:53 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Mon May 27 00:40:53 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.213
[Mon May 27 00:40:53 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.70"
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src10.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src10.csv
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src10.csv
[Mon May 27 00:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon May 27 00:40:55 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon May 27 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon May 27 00:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:10 2013] Spatial fit model total counts = 599.206000, observed total counts = 497.000000
[Mon May 27 00:41:10 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:41:10 2013] Spatial fit model total counts = 449.498000, observed total counts = 389.000000
[Mon May 27 00:41:10 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:41:10 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:10 2013] Assessing source extent using major
[Mon May 27 00:41:10 2013] Source does appear to be extended
[Mon May 27 00:41:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:10 2013] Source is confused with source 11
[Mon May 27 00:41:40 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:40 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Mon May 27 00:41:40 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.213
[Mon May 27 00:41:40 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.70"
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src10.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src10.csv
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src10.csv
[Mon May 27 00:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon May 27 00:41:41 2013] fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon May 27 00:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon May 27 00:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:52 2013] Source 12 is offset by 2.327876 and 0.297465 pixels which is larger than
2 X fitted extent = 0.885140 x 5.168966, not incorporating fit results
[Mon May 27 00:41:52 2013] Source 12 is offset by -3.508869 and 5.215095 pixels which is larger than
2 X fitted extent = 3.561802 x 3.561802, not incorporating fit results
[Mon May 27 00:41:52 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:52 2013] Assessing source extent using major
[Mon May 27 00:41:52 2013] Source does appear to be extended
[Mon May 27 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:42:19 2013] XMMSAS src. selection expression = ellipse(27029.854401, 23072.979279, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 00:42:19 2013] Not overwriting source region fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src.reg
[Mon May 27 00:42:19 2013] Extracting stamp from image fullrun_pn_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (274, 228) - (349, 303)
[Mon May 27 00:42:19 2013] XMMSAS bgd. selection expression = annulus(27029.854401, 23072.979279, 1087.500000, 2175.000000, X, Y) && !ellipse(27108.456543, 24315.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.939148, 25107.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.672000, 24939.468600, 1125.360032, 1125.360032, 0.000000, X, Y) && !ellipse(27656.767883, 24630.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.635742, 23403.025970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.521271, 23622.865051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27872.313782, 21912.406235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.966980, 21527.538498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27186.673706, 21533.821625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.167145, 21601.394775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.175200, 20977.759800, 1354.208039, 1354.208039, 0.000000, X, Y)
[Mon May 27 00:42:19 2013] Writing fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12.gif
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/events/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0042340701/products/events/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon May 27 00:42:20 2013] Mean detx,y = (-436.21, -1591.95) 
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/images/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src.img and ../../xmm0042340701/products/images/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/spectra/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0042340701/products/spectra/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon May 27 00:42:20 2013] Setting source spectrum file to fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon May 27 00:42:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon May 27 00:42:20 2013] ../../xmm0042340701/products/lightcurves/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0042340701/products/lightcurves/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon May 27 00:42:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 00:42:28 2013] rmf not generated due to insufficient counts
[Mon May 27 00:42:28 2013] fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Mon May 27 01:01:11 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:11 2013] Total counts from fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 354.00
[Mon May 27 01:01:11 2013] Total counts from fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.pi.gz = 439.00
[Mon May 27 01:01:11 2013] Got source and background scale factors 1103126.000000, 2690499.000000
[Mon May 27 01:01:11 2013] User source parameters:
  Position = (311.2, 265.8) = 5 16 36.90 -54 31 15.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 174.0 +/- 19.8
  Background aperture counts = 180.0
  Rate = 0.05 +/- 0.006

[Mon May 27 01:01:11 2013] Updating counts from extracted products
[Mon May 27 01:01:11 2013] Set source signif. to 174.01/13.42 = 12.97
[Mon May 27 01:01:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:16 2013] Using photon index=1.80, rate=0.0484, arf fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12.arf
[Mon May 27 01:01:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:16 2013] Updating source flux to 1.4e-13
[Mon May 27 01:01:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 01:01:49 2013] xmm0042340701/analysis//spectral/fullrun_pn_xmm0042340701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete