[Mon May 27 00:40:23 2013] Detection parameters:
  Position = (300.4, 245.3) = 5 16 42.32 -54 32 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 11.3
  Background counts = 30.8
  Rate = 0.003 +/- 0.0009

[Mon May 27 00:40:23 2013] Off-axis axis estimate = 3.85'
[Mon May 27 00:40:57 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:57 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Mon May 27 00:40:57 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067
[Mon May 27 00:40:57 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.35"
[Mon May 27 00:40:58 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src25.ximg exists
[Mon May 27 00:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src25.csv
[Mon May 27 00:40:58 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon May 27 00:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src25.csv
[Mon May 27 00:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:59 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon May 27 00:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon May 27 00:40:59 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon May 27 00:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon May 27 00:40:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:25 2013] Warning, spatial fit 25 centroid is now closest to src. 23
[Mon May 27 00:41:25 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:25 2013] Assessing source extent using major
[Mon May 27 00:41:25 2013] Source does appear to be extended
[Mon May 27 00:41:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:25 2013] Source is confused with source 26
[Mon May 27 00:41:42 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:42 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Mon May 27 00:41:42 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067
[Mon May 27 00:41:42 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.35"
[Mon May 27 00:41:44 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 27 00:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src20.csv
[Mon May 27 00:41:44 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 27 00:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src20.csv
[Mon May 27 00:41:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:44 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 27 00:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 27 00:41:44 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 27 00:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 27 00:41:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:42:06 2013] Warning, spatial fit 20 centroid is now closest to src. 23
[Mon May 27 00:42:06 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:42:06 2013] Assessing source extent using major
[Mon May 27 00:42:06 2013] Source does appear to be extended
[Mon May 27 00:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:42:33 2013] XMMSAS src. selection expression = ellipse(26085.946350, 21295.550003, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 00:42:33 2013] Not overwriting source region fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25_src.reg
[Mon May 27 00:42:33 2013] Extracting stamp from image fullrun_mos2_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (263, 208) - (338, 283)
[Mon May 27 00:42:33 2013] XMMSAS bgd. selection expression = annulus(26085.946350, 21295.550003, 1087.500000, 2175.000000, X, Y) && !ellipse(27070.070000, 24464.574000, 1154.792033, 1154.792033, 0.000000, X, Y) && !ellipse(26986.898800, 23384.226000, 723.748021, 723.748021, 0.000000, X, Y) && !ellipse(27489.179779, 23532.171906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28052.328000, 23006.844000, 1206.544035, 1206.544035, 0.000000, X, Y) && !ellipse(27178.806854, 22928.264252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.153534, 23006.231842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26264.043060, 23873.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27419.811829, 22406.511169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26356.342499, 20915.708237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.831848, 21675.436905, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 00:42:33 2013] Writing fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25.gif
[Mon May 27 00:45:14 2013] Mean detx,y = (-1149.52, 2328.40) 
[Mon May 27 00:45:17 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 00:45:32 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 00:45:32 2013] Setting source spectrum file to fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May 27 00:45:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon May 27 01:00:21 2013] Not generating rmf since there are only 43 counts
[Mon May 27 01:00:21 2013] rmf not generated due to insufficient counts
[Mon May 27 01:01:28 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:28 2013] Total counts from fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 310.00
[Mon May 27 01:01:28 2013] Total counts from fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1114.00
[Mon May 27 01:01:28 2013] Got source and background scale factors 1270620.000000, 7364572.000000
[Mon May 27 01:01:28 2013] User source parameters:
  Position = (300.4, 245.3) = 5 16 42.32 -54 32 46.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 117.8 +/- 18.6
  Background aperture counts = 192.2
  Rate = 0.009 +/- 0.001

[Mon May 27 01:01:28 2013] Updating counts from extracted products
[Mon May 27 01:01:28 2013] Set source signif. to 117.80/13.86 = 8.50
[Mon May 27 01:01:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:29 2013] Using photon index=1.80, rate=0.00871, arf fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25.arf
[Mon May 27 01:01:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:29 2013] Updating source flux to 8.9e-14
[Mon May 27 01:01:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 01:01:43 2013] xmm0042340701/analysis//spectral/fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete