[Mon May 27 00:40:22 2013] Detection parameters:
  Position = (258.0, 288.2) = 5 17 3.49 -54 29 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.5 +/- 12.4
  Background counts = 24.3
  Rate = 0.005 +/- 0.0009

[Mon May 27 00:40:23 2013] Off-axis axis estimate = 3.02'
[Mon May 27 00:40:57 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:57 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Mon May 27 00:40:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Mon May 27 00:40:57 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.94"
[Mon May 27 00:40:58 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 27 00:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src15.csv
[Mon May 27 00:40:58 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 27 00:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src15.csv
[Mon May 27 00:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:59 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 27 00:40:59 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 27 00:40:59 2013] Fit fullrun_mos2_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 27 00:41:25 2013] Spatial fit model total counts = 234.000000, observed total counts = 234.000000
[Mon May 27 00:41:25 2013] Offset between fit and detection position for source 13 = 0.245432 pixels
[Mon May 27 00:41:25 2013] 233.536800 total counts/ 184.878000 bgd. counts: snr = 3.578646
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.245432 pixels
  Position = (258.2, 288.0) = 5 17 3.40 -54 29 41.5
  Extent = 4.9 (3.7-6.8)", rotation angle = 0
  Source counts = 48.7 +/- 15.3
  Background counts = 184.9
  Rate = 0.004 +/- 0.001
[Mon May 27 00:41:25 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:25 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:25 2013] Source does appear to be extended
[Mon May 27 00:41:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:42 2013] Initial guess for spatial extent in simple fitting = 4.88"
[Mon May 27 00:41:42 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.142
[Mon May 27 00:41:42 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 4.88"
[Mon May 27 00:41:43 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src13.ximg exists
[Mon May 27 00:41:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src13.csv
[Mon May 27 00:41:43 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May 27 00:41:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src13.csv
[Mon May 27 00:41:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:44 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May 27 00:41:44 2013] fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 27 00:41:44 2013] Fit fullrun_mos2_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon May 27 00:42:06 2013] Warning, spatial fit 13 centroid is now closest to src. 16
[Mon May 27 00:42:06 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:42:06 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:42:06 2013] Source does appear to be extended
[Mon May 27 00:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:42:32 2013] XMMSAS src. selection expression = ellipse(22413.699440, 25011.305000, 292.581008, 292.581008, 0.000000, X, Y)
[Mon May 27 00:42:32 2013] Not overwriting source region fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13_src.reg
[Mon May 27 00:42:32 2013] Extracting stamp from image fullrun_mos2_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (241, 271) - (275, 305)
[Mon May 27 00:42:32 2013] XMMSAS bgd. selection expression = annulus(22413.699440, 25011.305000, 487.635014, 975.270028, X, Y)
[Mon May 27 00:42:32 2013] Writing fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13.gif
[Mon May 27 00:42:38 2013] Mean detx,y = (-2252.58, -2741.47) 
[Mon May 27 00:42:41 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 00:42:51 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 00:42:52 2013] Setting source spectrum file to fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May 27 00:42:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon May 27 00:59:01 2013] Not generating rmf since there are only 48 counts
[Mon May 27 00:59:01 2013] rmf not generated due to insufficient counts
[Mon May 27 01:01:26 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:26 2013] Total counts from fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 77.00
[Mon May 27 01:01:26 2013] Total counts from fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13_bgd.pi.gz = 212.00
[Mon May 27 01:01:26 2013] Got source and background scale factors 268800.000000, 2245580.000000
[Mon May 27 01:01:26 2013] User source parameters:
  Position = (258.2, 288.0) = 5 17 3.40 -54 29 41.5
  Extent = 4.9 (3.7-6.8)", rotation angle = 0
  Source aperture counts = 51.6 +/- 9.8
  Background aperture counts = 25.4
  Rate = 0.004 +/- 0.0007

[Mon May 27 01:01:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:29 2013] Using photon index=1.80, rate=0.0036, arf fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13.arf
[Mon May 27 01:01:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:29 2013] Updating source flux to 4.2e-14
[Mon May 27 01:01:41 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 01:01:43 2013] xmm0042340701/analysis//spectral/fullrun_mos2_xmm0042340701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete