[Mon May 27 00:40:18 2013] Detection parameters:
  Position = (356.7, 357.3) = 5 16 14.28 -54 24 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.7 +/- 15.6
  Background counts = 15.8
  Rate = 0.02 +/- 0.002

[Mon May 27 00:40:20 2013] Off-axis axis estimate = 6.00'
[Mon May 27 00:40:56 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:56 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Mon May 27 00:40:56 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.878
[Mon May 27 00:40:56 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.43"
[Mon May 27 00:40:56 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 27 00:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src3.csv
[Mon May 27 00:40:56 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 27 00:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src3.csv
[Mon May 27 00:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 27 00:40:57 2013] Fit fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 27 00:41:16 2013] Spatial fit model total counts = 257.000000, observed total counts = 257.000000
[Mon May 27 00:41:16 2013] Offset between fit and detection position for source 8 = 0.144060 pixels
[Mon May 27 00:41:16 2013] 257.099800 total counts/ 169.746000 bgd. counts: snr = 6.704741
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.144060 pixels
  Position = (356.5, 357.3) = 5 16 14.35 -54 24 39.9
  Extent = 5.6 (4.5-7.0)", rotation angle = 0
  Source counts = 87.4 +/- 16.0
  Background counts = 169.7
  Rate = 0.006 +/- 0.001
[Mon May 27 00:41:16 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:16 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:16 2013] Source does appear to be extended
[Mon May 27 00:41:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:41 2013] Initial guess for spatial extent in simple fitting = 5.63"
[Mon May 27 00:41:41 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.699
[Mon May 27 00:41:41 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.63"
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 27 00:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src3.csv
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 27 00:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src3.csv
[Mon May 27 00:41:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 27 00:41:42 2013] Fit fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 27 00:41:58 2013] Spatial fit model total counts = 255.000000, observed total counts = 255.000000
[Mon May 27 00:41:58 2013] Offset between fit and detection position for source 8 = 0.025411 pixels
[Mon May 27 00:41:58 2013] 255.306400 total counts/ 165.723000 bgd. counts: snr = 6.958829
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.025411 pixels
  Position = (356.5, 357.3) = 5 16 14.36 -54 24 39.9
  Extent = 5.8 (4.5-7.2)", rotation angle = 0
  Source counts = 89.6 +/- 16.0
  Background counts = 165.7
  Rate = 0.007 +/- 0.001
[Mon May 27 00:41:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:58 2013] Source does appear to be extended
[Mon May 27 00:41:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:42:28 2013] XMMSAS src. selection expression = ellipse(30967.767400, 31040.935800, 349.098010, 349.098010, 0.000000, X, Y)
[Mon May 27 00:42:28 2013] Not overwriting source region fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src.reg
[Mon May 27 00:42:28 2013] Extracting stamp from image fullrun_mos1_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (336, 337) - (377, 377)
[Mon May 27 00:42:28 2013] XMMSAS bgd. selection expression = annulus(30967.767400, 31040.935800, 581.830017, 1163.660033, X, Y)
[Mon May 27 00:42:28 2013] Writing fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8.gif
[Mon May 27 00:42:28 2013] ../../xmm0042340701/products/events/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0042340701/products/events/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Mon May 27 00:42:28 2013] Mean detx,y = (-2976.28, -8385.41) 
[Mon May 27 00:42:28 2013] ../../xmm0042340701/products/images/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src.img and ../../xmm0042340701/products/images/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Mon May 27 00:42:28 2013] ../../xmm0042340701/products/spectra/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0042340701/products/spectra/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Mon May 27 00:42:28 2013] Setting source spectrum file to fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 27 00:42:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 27 00:42:28 2013] ../../xmm0042340701/products/lightcurves/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0042340701/products/lightcurves/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Mon May 27 00:42:32 2013] Not generating rmf since there are only 89 counts
[Mon May 27 00:42:32 2013] rmf not generated due to insufficient counts
[Mon May 27 00:42:32 2013] fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Mon May 27 01:01:17 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:17 2013] Total counts from fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 122.00
[Mon May 27 01:01:17 2013] Total counts from fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_bgd.pi.gz = 201.00
[Mon May 27 01:01:17 2013] Got source and background scale factors 380800.000000, 3193600.000000
[Mon May 27 01:01:17 2013] User source parameters:
  Position = (356.5, 357.3) = 5 16 14.36 -54 24 39.9
  Extent = 5.8 (4.5-7.2)", rotation angle = 0
  Source aperture counts = 98.0 +/- 12.1
  Background aperture counts = 24.0
  Rate = 0.007 +/- 0.0009

[Mon May 27 01:01:21 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:21 2013] Using photon index=1.80, rate=0.00659, arf fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8.arf
[Mon May 27 01:01:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:21 2013] Updating source flux to 1.3e-13
[Mon May 27 01:01:32 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 01:01:41 2013] xmm0042340701/analysis//spectral/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete