[Mon May 27 00:40:19 2013] Detection parameters:
  Position = (388.9, 263.2) = 5 15 58.07 -54 31 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 7.6
  Background counts = 10.4
  Rate = 0.003 +/- 0.0009

[Mon May 27 00:40:20 2013] Off-axis axis estimate = 7.04'
[Mon May 27 00:40:56 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:56 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Mon May 27 00:40:56 2013] source mask rpix=2.3, npix_max = 31, mask sum = 34, frac = 1.094
[Mon May 27 00:40:56 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.95"
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src16.ximg exists
[Mon May 27 00:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src16.csv
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon May 27 00:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src16.csv
[Mon May 27 00:40:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon May 27 00:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon May 27 00:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 27 00:40:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:16 2013] Source 16 is offset by -3.695679 and 0.457166 pixels which is larger than
2 X fitted extent = 1.143632 x 1.143632, not incorporating fit results
[Mon May 27 00:41:16 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:16 2013] Assessing source extent using major
[Mon May 27 00:41:16 2013] Source does appear to be extended
[Mon May 27 00:41:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:16 2013] Deleting source due to low Poisson probability 0.9