[Mon May 27 00:40:19 2013] Detection parameters:
  Position = (314.8, 286.0) = 5 16 35.15 -54 29 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.4 +/- 14.7
  Background counts = 41.2
  Rate = 0.005 +/- 0.001

[Mon May 27 00:40:20 2013] Off-axis axis estimate = 1.49'
[Mon May 27 00:40:56 2013] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:40:56 2013] Initial guess for spatial extent in simple fitting = 7.17"
[Mon May 27 00:40:56 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.866
[Mon May 27 00:40:56 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.17"
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src12.ximg exists
[Mon May 27 00:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src12.csv
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon May 27 00:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src12.csv
[Mon May 27 00:40:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon May 27 00:40:57 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon May 27 00:40:57 2013] Fit fullrun_mos1_xmm0042340701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon May 27 00:41:16 2013] Warning, spatial fit 12 centroid is now closest to src. 13
[Mon May 27 00:41:16 2013] Source 12 is offset by -1.245542 and -1.884016 pixels which is larger than
2 X fitted extent = 0.792570 x 0.792570, not incorporating fit results
[Mon May 27 00:41:16 2013] Source 12 is offset by -5.232284 and -3.168913 pixels which is larger than
2 X fitted extent = 2.292704 x 2.292704, not incorporating fit results
[Mon May 27 00:41:16 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:16 2013] Assessing source extent using major
[Mon May 27 00:41:16 2013] Source does appear to be extended
[Mon May 27 00:41:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:41 2013] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:41:41 2013] Initial guess for spatial extent in simple fitting = 7.17"
[Mon May 27 00:41:41 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.866
[Mon May 27 00:41:41 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.17"
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 27 00:41:42 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src11.csv
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 27 00:41:42 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src11.csv
[Mon May 27 00:41:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 27 00:41:42 2013] fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 27 00:41:42 2013] Fit fullrun_mos1_xmm0042340701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 27 00:41:58 2013] Spatial fit model total counts = 856.010000, observed total counts = 856.000000
[Mon May 27 00:41:58 2013] Offset between fit and detection position for source 12 = 4.151617 pixels
[Mon May 27 00:41:58 2013] 753.285700 total counts/ 668.397000 bgd. counts: snr = 3.283467
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 4.151617 pixels
  Position = (317.1, 289.4) = 5 16 33.97 -54 29 35.7
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source counts = 84.9 +/- 27.4
  Background counts = 668.4
  Rate = 0.006 +/- 0.002
[Mon May 27 00:41:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:41:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:41:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:41:58 2013] Source does appear to be extended
[Mon May 27 00:41:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:41:58 2013] Source is confused with source 6
[Mon May 27 00:41:58 2013] Source is confused with source 11
[Mon May 27 00:41:58 2013] Source is confused with source 13
[Mon May 27 00:42:28 2013] XMMSAS src. selection expression = ellipse(27541.248000, 25128.132000, 860.760025, 860.760025, 0.000000, X, Y)
[Mon May 27 00:42:28 2013] Not overwriting source region fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src.reg
[Mon May 27 00:42:28 2013] Extracting stamp from image fullrun_mos1_xmm0042340701_pi300-10000_cl_sm2.00.img.gz, (268, 240) - (367, 339)
[Mon May 27 00:42:28 2013] XMMSAS bgd. selection expression = annulus(27541.248000, 25128.132000, 1434.600041, 2869.200083, X, Y) && !ellipse(27071.352200, 23760.999200, 1189.568034, 1189.568034, 0.000000, X, Y) && !ellipse(26948.812800, 24521.262000, 2438.256070, 2438.256070, 0.000000, X, Y) && !ellipse(27195.481200, 23876.940000, 1220.968035, 1220.968035, 0.000000, X, Y) && !ellipse(27076.612122, 23273.489746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.095306, 25413.716827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.152679, 24573.631042, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 00:42:28 2013] Writing fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12.gif
[Mon May 27 00:42:29 2013] ../../xmm0042340701/products/events/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0042340701/products/events/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon May 27 00:42:29 2013] Mean detx,y = (180.55, -2203.37) 
[Mon May 27 00:42:29 2013] ../../xmm0042340701/products/images/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src.img and ../../xmm0042340701/products/images/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon May 27 00:42:29 2013] ../../xmm0042340701/products/spectra/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0042340701/products/spectra/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon May 27 00:42:29 2013] Setting source spectrum file to fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon May 27 00:42:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon May 27 00:42:29 2013] ../../xmm0042340701/products/lightcurves/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0042340701/products/lightcurves/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon May 27 00:42:32 2013] Not generating rmf since there are only 84 counts
[Mon May 27 00:42:32 2013] rmf not generated due to insufficient counts
[Mon May 27 00:42:32 2013] fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Mon May 27 01:01:20 2013] Updating aperture counts using extracted products
[Mon May 27 01:01:20 2013] Total counts from fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 873.00
[Mon May 27 01:01:20 2013] Total counts from fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_bgd.pi.gz = 949.00
[Mon May 27 01:01:20 2013] Got source and background scale factors 2335180.000000, 8573532.000000
[Mon May 27 01:01:20 2013] User source parameters:
  Position = (317.1, 289.4) = 5 16 33.97 -54 29 35.7
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source aperture counts = 614.5 +/- 30.6
  Background aperture counts = 258.5
  Rate = 0.05 +/- 0.002

[Mon May 27 01:01:22 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 01:01:22 2013] Using photon index=1.80, rate=0.00625, arf fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12.arf
[Mon May 27 01:01:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 01:01:22 2013] Updating source flux to 6.2e-14
[Mon May 27 01:01:32 2013] Flag b found in src. 12 procflags, skipping spectral fitting
[Mon May 27 01:01:32 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Mon May 27 01:01:32 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 01:01:41 2013] xmm0042340701/analysis//spectral/fullrun_mos1_xmm0042340701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete