[Fri Jul 20 05:28:55 2012] Detection parameters:
  Position = (300.3, 333.2) = 3 7 8.30 -28 39 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 11.2
  Background counts = 24.5
  Rate = 0.006 +/- 0.002

[Fri Jul 20 05:28:56 2012] Off-axis axis estimate = 2.53'
[Fri Jul 20 05:30:25 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 05:30:25 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jul 20 05:30:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.215
[Fri Jul 20 05:30:25 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.69"
[Fri Jul 20 06:33:46 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 20 06:33:46 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 20 06:33:46 2012] Fit fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri Jul 20 06:33:47 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 20 06:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 20 06:33:47 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 20 06:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 20 06:33:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:44:26 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.237934 pixels away
[Fri Jul 20 07:44:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:26 2012] Assessing source extent using major
[Fri Jul 20 07:44:26 2012] Source does appear to be extended
[Fri Jul 20 07:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 07:44:42 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 07:44:42 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jul 20 07:44:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.215
[Fri Jul 20 07:44:42 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.69"
[Fri Jul 20 08:42:50 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jul 20 08:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_src15.csv
[Fri Jul 20 08:42:50 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jul 20 08:42:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_src15.csv
[Fri Jul 20 08:42:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 08:42:51 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jul 20 08:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jul 20 08:42:51 2012] fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jul 20 08:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jul 20 08:42:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 10:35:49 2012] Source 16 is offset by 7.347831 and -5.937578 pixels which is larger than
2 X fitted extent = 6.416165 x 6.416165, not incorporating fit results
[Fri Jul 20 10:35:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:49 2012] Assessing source extent using major
[Fri Jul 20 10:35:49 2012] Source does appear to be extended
[Fri Jul 20 10:35:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 10:36:10 2012] XMMSAS src. selection expression = ellipse(26075.387299, 28943.928741, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 10:36:10 2012] Writing source region out to fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16_src.reg
[Fri Jul 20 10:36:10 2012] Extracting stamp from image fullrun_pn_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (263, 296) - (338, 371)
[Fri Jul 20 10:36:10 2012] XMMSAS bgd. selection expression = annulus(26075.387299, 28943.928741, 1087.500000, 2175.000000, X, Y) && !ellipse(27740.820801, 27884.574707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27462.868439, 28873.328857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28221.264282, 28779.638184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24147.514771, 30611.196869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28811.652527, 29691.643402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25589.622000, 26488.518000, 1097.760032, 1097.760032, 0.000000, X, Y) && !ellipse(28768.946000, 25714.212000, 1196.576034, 1196.576034, 0.000000, X, Y) && !ellipse(28417.001007, 26220.922729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.038800, 26195.484000, 1118.920032, 1118.920032, 0.000000, X, Y)
[Fri Jul 20 10:36:10 2012] Writing fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16.gif
[Fri Jul 20 10:46:24 2012] Mean detx,y = (-1020.94, -1563.26) 
[Fri Jul 20 10:46:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 10:47:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 10:47:05 2012] Setting source spectrum file to fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 20 10:47:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jul 20 11:51:01 2012] Not generating rmf since there are only 46 counts
[Fri Jul 20 11:51:01 2012] rmf not generated due to insufficient counts
[Fri Jul 20 21:37:53 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:53 2012] Error reading totcts from fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 20 21:37:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:53 2012] Using photon index=1.80, rate=0.0065, arf fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16.arf
[Fri Jul 20 21:37:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:53 2012] Updating source flux to 2e-14
[Fri Jul 20 21:38:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 20 21:39:07 2012] xmm0042340501/analysis//spectral/fullrun_pn_xmm0042340501_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete