[Fri Jul 20 05:29:39 2012] Detection parameters:
  Position = (383.1, 376.1) = 3 6 40.94 -28 35 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.4 +/- 15.9
  Background counts = 4.7
  Rate = 0.02 +/- 0.002

[Fri Jul 20 05:29:40 2012] Off-axis axis estimate = 8.33'
[Fri Jul 20 07:13:25 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 07:13:25 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jul 20 07:13:25 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Fri Jul 20 07:13:25 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.59"
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 20 07:44:19 2012] Fit fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 20 07:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 20 07:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 20 07:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:44:34 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.481825 pixels away
[Fri Jul 20 07:44:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:34 2012] Assessing source extent using major
[Fri Jul 20 07:44:34 2012] Source does appear to be extended
[Fri Jul 20 07:44:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 09:46:23 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 09:46:23 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jul 20 09:46:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Fri Jul 20 09:46:23 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.59"
[Fri Jul 20 10:35:38 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 20 10:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src4.csv
[Fri Jul 20 10:35:38 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 20 10:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src4.csv
[Fri Jul 20 10:35:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 10:35:39 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 20 10:35:39 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 20 10:35:39 2012] Fit fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 20 10:35:58 2012] Spatial fit model total counts = 196.409000, observed total counts = 197.000000
[Fri Jul 20 10:35:58 2012] Offset between fit and detection position for source 6 = 0.242266 pixels
[Fri Jul 20 10:35:58 2012] 193.266100 total counts/ 86.535100 bgd. counts: snr = 11.473461
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.242266 pixels
  Position = (382.9, 376.2) = 3 6 41.02 -28 35 59.7
  Extent = 4.5 (3.8-5.6)", rotation angle = 0
  Source counts = 106.7 +/- 13.9
  Background counts = 86.5
  Rate = 0.008 +/- 0.001
[Fri Jul 20 10:35:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:58 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 10:35:58 2012] Source does appear to be extended
[Fri Jul 20 10:35:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 21:20:28 2012] XMMSAS src. selection expression = ellipse(33262.559280, 32683.434200, 269.752808, 269.752808, 0.000000, X, Y)
[Fri Jul 20 21:20:28 2012] Writing source region out to fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 20 21:20:28 2012] Extracting stamp from image fullrun_mos2_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (367, 361) - (398, 392)
[Fri Jul 20 21:20:28 2012] XMMSAS bgd. selection expression = annulus(33262.559280, 32683.434200, 449.588013, 899.176026, X, Y)
[Fri Jul 20 21:20:28 2012] Writing fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6.gif
[Fri Jul 20 21:23:58 2012] Mean detx,y = (-5544.09, 5745.53) 
[Fri Jul 20 21:23:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 21:24:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 21:24:11 2012] Setting source spectrum file to fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 21:24:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 20 21:37:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:54 2012] Error reading totcts from fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 21:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:54 2012] Using photon index=1.80, rate=0.008, arf fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6.arf
[Fri Jul 20 21:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:54 2012] Updating source flux to 1.6e-13
[Fri Jul 20 21:38:49 2012] Reading fit data from xmm0042340501/analysis//spectral/fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6_pl.csv
[Fri Jul 20 21:38:49 2012] Spectral fit parameter nH value = 1.96578e+12
[Fri Jul 20 21:38:49 2012] Spectral fit parameter PhoIndex value = 2.27572
[Fri Jul 20 21:38:49 2012] Failed to get F(0.3-8.0) from xmm0042340501/analysis//spectral/fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 21:38:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:38:49 2012] Using Nh = 2e+12, photon index=2.28, rate=0.008, arf fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src6.arf
[Fri Jul 20 21:38:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:38:49 2012] Updating source flux to 1.3e-13