[Fri Jul 20 05:29:39 2012] Detection parameters:
  Position = (300.5, 332.0) = 3 7 8.22 -28 39 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.9 +/- 9.4
  Background counts = 12.6
  Rate = 0.003 +/- 0.0008

[Fri Jul 20 05:29:40 2012] Off-axis axis estimate = 2.44'
[Fri Jul 20 07:13:25 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 07:13:25 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Jul 20 07:13:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Fri Jul 20 07:13:25 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.65"
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 20 07:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src13.csv
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 20 07:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src13.csv
[Fri Jul 20 07:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 20 07:44:19 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 20 07:44:19 2012] Fit fullrun_mos2_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul 20 07:44:34 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.071315 pixels away
[Fri Jul 20 07:44:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:34 2012] Assessing source extent using major
[Fri Jul 20 07:44:34 2012] Source does appear to be extended
[Fri Jul 20 07:44:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 09:46:23 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 09:46:23 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Jul 20 09:46:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Fri Jul 20 09:46:23 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.65"
[Fri Jul 20 10:35:38 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul 20 10:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src13.csv
[Fri Jul 20 10:35:38 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul 20 10:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src13.csv
[Fri Jul 20 10:35:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 10:35:39 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 20 10:35:39 2012] fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 20 10:35:39 2012] Fit fullrun_mos2_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jul 20 10:35:58 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.073455 pixels away
[Fri Jul 20 10:35:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:58 2012] Assessing source extent using major
[Fri Jul 20 10:35:58 2012] Source does appear to be extended
[Fri Jul 20 10:35:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 21:20:29 2012] XMMSAS src. selection expression = ellipse(26097.859467, 28833.564484, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 21:20:29 2012] Writing source region out to fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src11_src.reg
[Fri Jul 20 21:20:29 2012] Extracting stamp from image fullrun_mos2_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (263, 294) - (338, 369)
[Fri Jul 20 21:20:29 2012] XMMSAS bgd. selection expression = annulus(26097.859467, 28833.564484, 1087.500000, 2175.000000, X, Y) && !ellipse(27572.930023, 27886.887238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28149.899750, 27969.150665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27300.198000, 27143.338000, 1105.392032, 1105.392032, 0.000000, X, Y) && !ellipse(27835.610657, 29721.669128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.018707, 29609.602997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.581757, 26162.620941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.115356, 27448.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.813354, 26924.465668, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 21:20:29 2012] Writing fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src11.gif
[Fri Jul 20 21:25:56 2012] Mean detx,y = (1137.40, 1230.10) 
[Fri Jul 20 21:25:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 21:26:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 21:26:05 2012] Setting source spectrum file to fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 20 21:26:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jul 20 21:37:09 2012] Not generating rmf since there are only 37 counts
[Fri Jul 20 21:37:09 2012] rmf not generated due to insufficient counts
[Fri Jul 20 21:37:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:54 2012] Error reading totcts from fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 20 21:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:54 2012] Using photon index=1.80, rate=0.00305, arf fullrun_mos2_xmm0042340501_pi300-10000_pass1_cl_src11.arf
[Fri Jul 20 21:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:54 2012] Updating source flux to 3e-14
[Fri Jul 20 21:38:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting