[Fri Jul 20 05:29:18 2012] Detection parameters:
  Position = (383.1, 375.9) = 3 6 40.94 -28 36 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.6 +/- 17.1
  Background counts = 5.0
  Rate = 0.02 +/- 0.002

[Fri Jul 20 05:29:18 2012] Off-axis axis estimate = 8.32'
[Fri Jul 20 06:33:47 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:33:47 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jul 20 06:33:47 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Fri Jul 20 06:33:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.59"
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 20 07:13:25 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 20 07:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:44:30 2012] Source 4 is offset by 6.576612 and 5.446374 pixels which is larger than
2 X fitted extent = 6.517793 x 6.517793, not incorporating fit results
[Fri Jul 20 07:44:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:30 2012] Assessing source extent using major
[Fri Jul 20 07:44:30 2012] Source does appear to be extended
[Fri Jul 20 07:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 08:42:51 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 08:42:51 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jul 20 08:42:51 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Fri Jul 20 08:42:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.59"
[Fri Jul 20 09:46:22 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 20 09:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 09:46:22 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 20 09:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 09:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 09:46:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 09:46:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 20 09:46:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 10:35:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.954184 pixels away
[Fri Jul 20 10:35:53 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 166.278938 pixels away
[Fri Jul 20 10:35:53 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:53 2012] Assessing source extent using major
[Fri Jul 20 10:35:53 2012] Source does appear to be extended
[Fri Jul 20 10:35:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 12:21:33 2012] XMMSAS src. selection expression = ellipse(33281.941284, 32657.284576, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing source region out to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 20 12:21:33 2012] Extracting stamp from image fullrun_mos1_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (346, 338) - (421, 413)
[Fri Jul 20 12:21:33 2012] XMMSAS bgd. selection expression = annulus(33281.941284, 32657.284576, 1087.500000, 2175.000000, X, Y) && !ellipse(28917.342000, 29925.618000, 2639.200076, 2639.200076, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src4.gif
[Fri Jul 20 12:27:14 2012] Mean detx,y = (5901.64, 5423.75) 
[Fri Jul 20 12:27:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 12:27:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 12:27:41 2012] Setting source spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 12:27:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 20 12:57:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 12:57:23 2012] rmf not generated due to insufficient counts
[Fri Jul 20 21:37:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:54 2012] Error reading totcts from fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 21:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:54 2012] Using photon index=1.80, rate=0.0204, arf fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src4.arf
[Fri Jul 20 21:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:54 2012] Updating source flux to 2.6e-13
[Fri Jul 20 21:37:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting