[Fri Jul 20 05:29:18 2012] Detection parameters:
  Position = (318.2, 337.0) = 3 7 2.39 -28 38 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.6 +/- 14.5
  Background counts = 15.5
  Rate = 0.009 +/- 0.001

[Fri Jul 20 05:29:18 2012] Off-axis axis estimate = 3.14'
[Fri Jul 20 06:33:47 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:33:47 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jul 20 06:33:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.686
[Fri Jul 20 06:33:47 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.00"
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src5.csv
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src5.csv
[Fri Jul 20 07:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jul 20 07:13:25 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jul 20 07:44:30 2012] Source 12 is offset by -1.826618 and 6.341346 pixels which is larger than
2 X fitted extent = 4.121862 x 4.121862, not incorporating fit results
[Fri Jul 20 07:44:30 2012] Source 12 is offset by -2.285993 and 6.460886 pixels which is larger than
2 X fitted extent = 3.611986 x 3.611986, not incorporating fit results
[Fri Jul 20 07:44:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:30 2012] Assessing source extent using major
[Fri Jul 20 07:44:30 2012] Source does appear to be extended
[Fri Jul 20 07:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 07:44:30 2012] Source is confused with source 11
[Fri Jul 20 08:42:51 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 08:42:51 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jul 20 08:42:51 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.686
[Fri Jul 20 08:42:51 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.00"
[Fri Jul 20 09:46:22 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jul 20 09:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src5.csv
[Fri Jul 20 09:46:22 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jul 20 09:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src5.csv
[Fri Jul 20 09:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jul 20 09:46:23 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jul 20 10:35:53 2012] Warning, spatial fit 5 centroid is now closest to src. 11
[Fri Jul 20 10:35:53 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:53 2012] Assessing source extent using major
[Fri Jul 20 10:35:53 2012] Source does appear to be extended
[Fri Jul 20 10:35:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 12:21:33 2012] XMMSAS src. selection expression = ellipse(27630.748596, 29269.345062, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing source region out to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src12_src.reg
[Fri Jul 20 12:21:33 2012] Extracting stamp from image fullrun_mos1_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (281, 299) - (356, 374)
[Fri Jul 20 12:21:33 2012] XMMSAS bgd. selection expression = annulus(27630.748596, 29269.345062, 1087.500000, 2175.000000, X, Y) && !ellipse(27736.603000, 27932.113000, 984.392028, 984.392028, 0.000000, X, Y) && !ellipse(26868.022000, 26912.198000, 912.280026, 912.280026, 0.000000, X, Y) && !ellipse(28272.364000, 28937.086000, 1256.640036, 1256.640036, 0.000000, X, Y) && !ellipse(27531.612000, 27819.550000, 1524.936044, 1524.936044, 0.000000, X, Y) && !ellipse(29161.593353, 27643.386536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.492000, 28671.120000, 2394.784069, 2394.784069, 0.000000, X, Y) && !ellipse(28917.342000, 29925.618000, 2639.200076, 2639.200076, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src12.gif
[Fri Jul 20 12:28:01 2012] Mean detx,y = (1891.27, 121.05) 
[Fri Jul 20 12:28:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 12:28:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 12:28:16 2012] Setting source spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jul 20 12:28:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jul 20 12:57:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 12:57:38 2012] rmf not generated due to insufficient counts
[Fri Jul 20 21:37:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:54 2012] Error reading totcts from fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jul 20 21:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:54 2012] Using photon index=1.80, rate=0.00878, arf fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src12.arf
[Fri Jul 20 21:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:54 2012] Updating source flux to 9e-14
[Fri Jul 20 21:37:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting