[Fri Jul 20 05:29:18 2012] Detection parameters:
  Position = (332.5, 338.9) = 3 6 57.65 -28 38 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 10.0
  Background counts = 18.4
  Rate = 0.003 +/- 0.0008

[Fri Jul 20 05:29:18 2012] Off-axis axis estimate = 3.84'
[Fri Jul 20 06:33:47 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:33:47 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Fri Jul 20 06:33:47 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Fri Jul 20 06:33:47 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.35"
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src19.csv
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src19.csv
[Fri Jul 20 07:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jul 20 07:13:25 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Jul 20 07:44:30 2012] Warning, spatial fit 19 centroid is now closest to src. 11
[Fri Jul 20 07:44:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:30 2012] Assessing source extent using major
[Fri Jul 20 07:44:30 2012] Source does appear to be extended
[Fri Jul 20 07:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 07:44:30 2012] Source is confused with source 11
[Fri Jul 20 08:42:51 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 08:42:51 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Fri Jul 20 08:42:51 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Fri Jul 20 08:42:51 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.35"
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jul 20 09:46:23 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src16 appears to have run properly
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jul 20 09:46:23 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jul 20 10:35:53 2012] Spatial fit model total counts = 3673.480000, observed total counts = 3672.000000
[Fri Jul 20 10:35:53 2012] Offset between fit and detection position for source 10 = 5.644205 pixels
[Fri Jul 20 10:35:53 2012] Warning, changing simple spatial fit ID from 16 to 6
[Fri Jul 20 10:35:53 2012] 2798.983000 total counts/ 969.403000 bgd. counts: snr = 58.762359
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.644205 pixels
  Position = (332.9, 344.5) = 3 6 57.51 -28 38 17.8
  Extent = 33.0 (32.8-66.0)", rotation angle = 0
  Source counts = 1829.6 +/- 52.9
  Background counts = 969.4
  Rate = 0.1 +/- 0.004
[Fri Jul 20 10:35:53 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:53 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 10:35:53 2012] Source does appear to be extended
[Fri Jul 20 10:35:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 12:21:33 2012] Counts = 1829.580000, rescaling region sizes by 2.000000
[Fri Jul 20 12:21:33 2012] XMMSAS src. selection expression = ellipse(28917.342000, 29925.618000, 3958.800114, 3958.800114, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing source region out to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src10_src.reg
[Fri Jul 20 12:21:33 2012] Extracting stamp from image fullrun_mos1_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (105, 117) - (560, 572)
[Fri Jul 20 12:21:33 2012] XMMSAS bgd. selection expression = annulus(28917.342000, 29925.618000, 13196.000380, 26392.000759, X, Y) && !ellipse(27736.603000, 27932.113000, 984.392028, 984.392028, 0.000000, X, Y) && !ellipse(40342.389008, 27447.078979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33281.941284, 32657.284576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26868.022000, 26912.198000, 912.280026, 912.280026, 0.000000, X, Y) && !ellipse(27630.748596, 29269.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.364000, 28937.086000, 1256.640036, 1256.640036, 0.000000, X, Y) && !ellipse(27531.612000, 27819.550000, 1524.936044, 1524.936044, 0.000000, X, Y) && !ellipse(29161.593353, 27643.386536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.492000, 28671.120000, 2394.784069, 2394.784069, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src10.gif
[Fri Jul 20 12:30:19 2012] Mean detx,y = (1215.76, 542.09) 
[Fri Jul 20 12:30:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 12:42:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 12:42:23 2012] Setting source spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 20 12:42:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jul 20 21:37:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:54 2012] Error reading totcts from fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 20 21:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:54 2012] Using photon index=1.80, rate=0.137, arf fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src10.arf
[Fri Jul 20 21:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:54 2012] Updating source flux to 1.2e-12
[Fri Jul 20 21:37:56 2012] Flag c found in src. 10 procflags, skipping spectral fitting