[Fri Jul 20 05:29:18 2012] Detection parameters:
  Position = (319.9, 321.1) = 3 7 1.81 -28 39 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1774.7 +/- 51.6
  Background counts = 18.5
  Rate = 0.1 +/- 0.004

[Fri Jul 20 05:29:18 2012] Off-axis axis estimate = 2.26'
[Fri Jul 20 06:33:47 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 06:33:47 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Fri Jul 20 06:33:47 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Fri Jul 20 06:33:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.56"
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 07:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 07:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 07:13:25 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 07:13:25 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 07:44:30 2012] Spatial fit model total counts = 3899.830000, observed total counts = 3900.000000
[Fri Jul 20 07:44:30 2012] Offset between fit and detection position for source 1 = 0.750949 pixels
[Fri Jul 20 07:44:30 2012] 3927.290000 total counts/ 2109.490000 bgd. counts: snr = 39.578321
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.750949 pixels
  Position = (319.4, 321.6) = 3 7 1.99 -28 39 57.5
  Extent = 12.3 (11.3-13.5)", rotation angle = 0
  Source counts = 1817.8 +/- 62.7
  Background counts = 2109.5
  Rate = 0.1 +/- 0.005
[Fri Jul 20 07:44:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 07:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 07:44:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 07:44:30 2012] Source does appear to be extended
[Fri Jul 20 07:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 07:44:30 2012] Source is confused with source 13
[Fri Jul 20 08:42:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 08:42:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 08:42:51 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Fri Jul 20 08:42:51 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.106
[Fri Jul 20 08:42:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.30"
[Fri Jul 20 09:46:22 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 09:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 09:46:22 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 09:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 09:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 09:46:23 2012] fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 09:46:23 2012] Fit fullrun_mos1_xmm0042340501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 10:35:53 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Fri Jul 20 10:35:53 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 10:35:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 10:35:53 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 10:35:53 2012] Source does appear to be extended
[Fri Jul 20 10:35:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 12:21:33 2012] Counts = 1817.800000, rescaling region sizes by 2.000000
[Fri Jul 20 12:21:33 2012] XMMSAS src. selection expression = ellipse(27736.603000, 27932.113000, 1476.588042, 1476.588042, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing source region out to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 12:21:33 2012] Extracting stamp from image fullrun_mos1_xmm0042340501_pi300-10000_cl_sm2.00.img.gz, (235, 237) - (404, 406)
[Fri Jul 20 12:21:33 2012] XMMSAS bgd. selection expression = annulus(27736.603000, 27932.113000, 4921.960142, 9843.920283, X, Y) && !ellipse(33281.941284, 32657.284576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26868.022000, 26912.198000, 912.280026, 912.280026, 0.000000, X, Y) && !ellipse(27630.748596, 29269.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.364000, 28937.086000, 1256.640036, 1256.640036, 0.000000, X, Y) && !ellipse(27531.612000, 27819.550000, 1524.936044, 1524.936044, 0.000000, X, Y) && !ellipse(29161.593353, 27643.386536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.492000, 28671.120000, 2394.784069, 2394.784069, 0.000000, X, Y) && !ellipse(28917.342000, 29925.618000, 2639.200076, 2639.200076, 0.000000, X, Y)
[Fri Jul 20 12:21:33 2012] Writing fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 12:21:37 2012] Mean detx,y = (756.80, 292.78) 
[Fri Jul 20 12:21:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 12:26:31 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 12:26:31 2012] Setting source spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 12:26:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 21:37:54 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:37:54 2012] Error reading totcts from fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 21:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:37:54 2012] Using photon index=1.80, rate=0.136, arf fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 21:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:37:54 2012] Updating source flux to 1.2e-12
[Fri Jul 20 21:37:56 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Jul 20 21:38:37 2012] Reading fit data from xmm0042340501/analysis//spectral/fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 20 21:38:37 2012] Spectral fit parameter nH value = 5.83881e+20
[Fri Jul 20 21:38:37 2012] Spectral fit parameter PhoIndex value = 1.88586
[Fri Jul 20 21:38:37 2012] Failed to get F(0.3-8.0) from xmm0042340501/analysis//spectral/fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 21:38:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:38:37 2012] Using Nh = 5.8e+20, photon index=1.89, rate=0.136, arf fullrun_mos1_xmm0042340501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 21:38:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:38:37 2012] Updating source flux to 1.2e-12