[Sun Aug 12 01:20:42 2012] Detection parameters:
  Position = (279.2, 300.0) = 3 3 44.87 -77 52 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.2 +/- 30.5
  Background counts = 214.6
  Rate = 0.05 +/- 0.006

[Sun Aug 12 01:20:43 2012] Off-axis axis estimate = 1.40'
[Sun Aug 12 01:26:17 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:26:17 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sun Aug 12 01:26:17 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Sun Aug 12 01:26:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.13"
[Sun Aug 12 01:31:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug 12 01:31:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug 12 01:31:47 2012] Fit fullrun_pn_xmm0042340401_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun Aug 12 01:31:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug 12 01:31:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug 12 01:31:47 2012] Fit fullrun_pn_xmm0042340401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug 12 02:28:48 2012] Spatial fit model total counts = 2782.590000, observed total counts = 2788.000000
[Sun Aug 12 02:28:48 2012] Offset between fit and detection position for source 2 = 0.924975 pixels
[Sun Aug 12 02:28:48 2012] 2769.745000 total counts/ 2472.260000 bgd. counts: snr = 5.982986
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.924975 pixels
  Position = (278.3, 300.4) = 3 3 46.01 -77 52 42.4
  Extent = 14.3 (14.2-28.5)", rotation angle = 0
  Source counts = 297.5 +/- 52.6
  Background counts = 2472.3
  Rate = 0.08 +/- 0.01
[Sun Aug 12 02:28:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 02:28:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 02:28:48 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 02:28:48 2012] Source does appear to be extended
[Sun Aug 12 02:28:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 02:28:48 2012] Source is confused with source 1
[Sun Aug 12 02:29:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 02:29:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 02:29:02 2012] Initial guess for spatial extent in simple fitting = 14.26"
[Sun Aug 12 02:29:02 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.858
[Sun Aug 12 02:29:02 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 14.26"
[Sun Aug 12 02:34:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug 12 02:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_src2.csv
[Sun Aug 12 02:34:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug 12 02:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_src2.csv
[Sun Aug 12 02:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 02:34:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug 12 02:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Aug 12 02:34:47 2012] fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug 12 02:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Aug 12 02:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 03:27:26 2012] Warning, spatial fit 2 centroid is now closest to src. 10
[Sun Aug 12 03:27:26 2012] Source 2 in spatial fitting is no longer close to this source
[Sun Aug 12 03:27:26 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 03:27:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 03:27:26 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 03:27:26 2012] Source does appear to be extended
[Sun Aug 12 03:27:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 03:27:38 2012] XMMSAS src. selection expression = ellipse(24167.841000, 26087.918000, 855.516025, 855.516025, 0.000000, X, Y)
[Sun Aug 12 03:27:38 2012] Writing source region out to fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 12 03:27:38 2012] Extracting stamp from image fullrun_pn_xmm0042340401_pi300-10000_cl_sm2.00.img.gz, (229, 251) - (328, 350)
[Sun Aug 12 03:27:38 2012] XMMSAS bgd. selection expression = annulus(24167.841000, 26087.918000, 1425.860041, 2851.720082, X, Y) && !ellipse(24762.222600, 25910.679200, 697.584820, 697.584820, 0.000000, X, Y)
[Sun Aug 12 03:27:38 2012] Writing fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2.gif
[Sun Aug 12 03:28:36 2012] Mean detx,y = (-632.87, -202.09) 
[Sun Aug 12 03:28:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 03:29:27 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 03:29:28 2012] Setting source spectrum file to fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 12 03:29:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 12 04:35:09 2012] Updating aperture counts using extracted products
[Sun Aug 12 04:35:09 2012] Error reading totcts from fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 12 04:35:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 04:35:09 2012] Using photon index=1.80, rate=0.0847, arf fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2.arf
[Sun Aug 12 04:35:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 04:35:09 2012] Updating source flux to 2e-13
[Sun Aug 12 04:37:24 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Aug 12 04:38:00 2012] Reading fit data from xmm0042340401/analysis//spectral/fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2_pl.csv
[Sun Aug 12 04:38:00 2012] Spectral fit parameter nH value = 1.42421e+21
[Sun Aug 12 04:38:00 2012] Spectral fit parameter PhoIndex value = 1.95776
[Sun Aug 12 04:38:00 2012] Failed to get F(0.3-8.0) from xmm0042340401/analysis//spectral/fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 04:38:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 04:38:00 2012] Using Nh = 1.4e+21, photon index=1.96, rate=0.0847, arf fullrun_pn_xmm0042340401_pi300-10000_pass1_cl_src2.arf
[Sun Aug 12 04:38:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 04:38:00 2012] Updating source flux to 2.5e-13