[Thu May  9 00:52:55 2013] Detection parameters:
  Position = (274.9, 285.0) = 2 32 18.57 -44 20 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4679.0 +/- 83.1
  Background counts = 64.8
  Rate = 0.6 +/- 0.01

[Thu May  9 00:52:55 2013] Off-axis axis estimate = 1.96'
[Thu May  9 00:54:27 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Thu May  9 00:54:27 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Thu May  9 00:54:27 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Thu May  9 00:54:27 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Thu May  9 01:33:28 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  9 01:33:28 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  9 01:33:28 2013] Fit fullrun_pn_xmm0042340301_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu May  9 01:33:28 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  9 01:33:28 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  9 01:33:28 2013] Fit fullrun_pn_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  9 03:35:11 2013] Spatial fit model total counts = 9455.460000, observed total counts = 8868.000000
[Thu May  9 03:35:11 2013] Offset between fit and detection position for source 2 = 0.420408 pixels
[Thu May  9 03:35:11 2013] 9469.040000 total counts/ 5006.460000 bgd. counts: snr = 63.069682
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.420408 pixels
  Position = (274.6, 285.3) = 2 32 18.70 -44 20 47.3
  Extent = 12.5 (11.8-13.5)" x 10.7 (10.2-11.5)", rotation angle = 36 (25-49) degrees
  Source counts = 4462.6 +/- 97.3
  Background counts = 5006.5
  Rate = 0.5 +/- 0.01
[Thu May  9 03:35:11 2013] Vigneting correction estimate = 1.000000
[Thu May  9 03:35:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 03:35:11 2013] Assessing source extent using major axis lower bound
[Thu May  9 03:35:11 2013] Source does appear to be extended
[Thu May  9 03:35:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Thu May  9 03:35:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 03:35:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 03:35:26 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Thu May  9 03:35:26 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Thu May  9 03:35:26 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.61"
[Thu May  9 04:05:49 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  9 04:05:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_src1.csv
[Thu May  9 04:05:49 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  9 04:05:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_src1.csv
[Thu May  9 04:05:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 04:05:49 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  9 04:05:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May  9 04:05:49 2013] fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  9 04:05:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May  9 04:05:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 05:51:28 2013] Spatial fit model total counts = 12223.300000, observed total counts = 11098.000000
[Thu May  9 05:51:28 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 05:51:28 2013] Vigneting correction estimate = 1.000000
[Thu May  9 05:51:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 05:51:28 2013] Assessing source extent using major axis lower bound
[Thu May  9 05:51:28 2013] Source does appear to be extended
[Thu May  9 05:51:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Thu May  9 05:51:40 2013] Counts = 4462.580000, rescaling region sizes by 2.000000
[Thu May  9 05:51:40 2013] XMMSAS src. selection expression = ellipse(23840.775000, 24773.555000, 1499.004043, 1288.356037, 36.411200, X, Y)
[Thu May  9 05:51:40 2013] Writing source region out to fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2_src.reg
[Thu May  9 05:51:40 2013] Extracting stamp from image fullrun_pn_xmm0042340301_pi300-10000_cl_sm2.00.img.gz, (188, 199) - (361, 371)
[Thu May  9 05:51:40 2013] XMMSAS bgd. selection expression = annulus(23840.775000, 24773.555000, 4996.680144, 9993.360288, X, Y) && !ellipse(19717.539978, 23572.897400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28786.196106, 23105.904297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31461.402720, 18673.451000, 467.432813, 274.458408, 320.365370, X, Y) && !ellipse(24611.779200, 30278.179800, 440.861613, 440.861613, 0.000000, X, Y) && !ellipse(26164.628143, 24754.242065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.854858, 24235.372345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22858.561768, 24195.722137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24478.124329, 22494.188202, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 05:51:40 2013] Writing fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2.gif
[Thu May  9 05:53:49 2013] Mean detx,y = (151.22, -440.85) 
[Thu May  9 05:53:52 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 05:56:26 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 05:56:27 2013] Setting source spectrum file to fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May  9 05:56:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May  9 07:43:04 2013] Updating aperture counts using extracted products
[Thu May  9 07:43:04 2013] Total counts from fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 13745.00
[Thu May  9 07:43:04 2013] Total counts from fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 10086.00
[Thu May  9 07:43:04 2013] Got source and background scale factors 5325918.000000, 206668191.000000
[Thu May  9 07:43:04 2013] User source parameters:
  Position = (274.6, 285.3) = 2 32 18.70 -44 20 47.3
  Extent = 12.5 (11.8-13.5)" x 10.7 (10.2-11.5)", rotation angle = 36 (25-49) degrees
  Source aperture counts = 13485.1 +/- 118.2
  Background aperture counts = 259.9
  Rate = 1 +/- 0.01

[Thu May  9 07:43:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 07:43:07 2013] Using photon index=1.80, rate=0.496, arf fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2.arf
[Thu May  9 07:43:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 07:43:07 2013] Updating source flux to 1.3e-12
[Thu May  9 07:43:21 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Thu May  9 07:43:23 2013] xmm0042340301/analysis//spectral/fullrun_pn_xmm0042340301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete