[Thu May 9 00:53:20 2013] Detection parameters: Position = (268.0, 269.5) = 2 32 21.38 -44 21 46.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 91.7 +/- 16.2 Background counts = 22.7 Rate = 0.009 +/- 0.002 [Thu May 9 00:53:20 2013] Off-axis axis estimate = 3.05' [Thu May 9 01:33:29 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Thu May 9 01:33:29 2013] Initial guess for spatial extent in simple fitting = 7.95" [Thu May 9 01:33:29 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.738 [Thu May 9 01:33:29 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.95" [Thu May 9 02:36:15 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src8.ximg exists [Thu May 9 02:36:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src8.csv [Thu May 9 02:36:15 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src8_1.ximg exists [Thu May 9 02:36:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src8.csv [Thu May 9 02:36:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 02:36:16 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Thu May 9 02:36:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src8.csv [Thu May 9 02:36:16 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Thu May 9 02:36:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src8.csv [Thu May 9 02:36:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 03:35:15 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.185797 pixels away [Thu May 9 03:35:15 2013] Vigneting correction estimate = 1.000000 [Thu May 9 03:35:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 03:35:15 2013] Assessing source extent using major [Thu May 9 03:35:15 2013] Source does appear to be extended [Thu May 9 03:35:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 03:35:15 2013] Source is confused with source 7 [Thu May 9 04:05:49 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Thu May 9 04:05:49 2013] Initial guess for spatial extent in simple fitting = 7.95" [Thu May 9 04:05:49 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.738 [Thu May 9 04:05:49 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.95" [Thu May 9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src8.ximg exists [Thu May 9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src8_1.ximg exists [Thu May 9 05:03:30 2013] Fit fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src8 appears to have run properly [Thu May 9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Thu May 9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Thu May 9 05:03:30 2013] Fit fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly [Thu May 9 05:51:31 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 46.128604 pixels away [Thu May 9 05:51:31 2013] Source 4 is offset by -3.961419 and -7.832310 pixels which is larger than 2 X fitted extent = 6.531173 x 6.531173, not incorporating fit results [Thu May 9 05:51:32 2013] Vigneting correction estimate = 1.000000 [Thu May 9 05:51:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 05:51:32 2013] Assessing source extent using major [Thu May 9 05:51:32 2013] Source does appear to be extended [Thu May 9 05:51:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 06:13:07 2013] XMMSAS src. selection expression = ellipse(23265.548553, 23396.252991, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 9 06:13:07 2013] Writing source region out to fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4_src.reg [Thu May 9 06:13:07 2013] Extracting stamp from image fullrun_mos1_xmm0042340301_pi300-10000_cl_sm2.00.img.gz, (230, 232) - (305, 307) [Thu May 9 06:13:07 2013] XMMSAS bgd. selection expression = annulus(23265.548553, 23396.252991, 1087.500000, 2175.000000, X, Y) && !ellipse(23845.620400, 24793.020800, 998.080029, 820.624024, 42.216000, X, Y) && !ellipse(25103.142000, 23421.046000, 354.510410, 354.510410, 0.000000, X, Y) && !ellipse(25581.898000, 24370.594000, 1114.072032, 1114.072032, 0.000000, X, Y) && !ellipse(23238.400000, 22634.268000, 1275.456037, 1275.456037, 0.000000, X, Y) && !ellipse(23291.352783, 25853.193207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25687.754000, 23463.794000, 2422.992070, 2422.992070, 0.000000, X, Y) && !ellipse(26547.688000, 24348.369800, 2228.144064, 1724.024050, 90.000000, X, Y) && !ellipse(25054.366577, 22979.564728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24436.581085, 22777.535583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26547.180000, 23345.076000, 1170.008034, 1170.008034, 0.000000, X, Y) && !ellipse(25567.517365, 23017.717499, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 9 06:13:07 2013] Writing fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4.gif [Thu May 9 06:18:16 2013] Mean detx,y = (1925.55, -201.63) [Thu May 9 06:18:17 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 06:18:25 2013] Binned source spectrum to 10 counts/bin [Thu May 9 06:18:26 2013] Setting source spectrum file to fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Thu May 9 06:18:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4_bgd.pi.gz [Thu May 9 06:32:16 2013] Not generating rmf since there are only 91 counts [Thu May 9 06:32:16 2013] rmf not generated due to insufficient counts [Thu May 9 07:43:08 2013] Updating aperture counts using extracted products [Thu May 9 07:43:08 2013] Total counts from fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 541.00 [Thu May 9 07:43:08 2013] Total counts from fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 540.00 [Thu May 9 07:43:08 2013] Got source and background scale factors 1261720.000000, 3772800.000000 [Thu May 9 07:43:08 2013] User source parameters: Position = (268.0, 269.5) = 2 32 21.38 -44 21 46.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 360.4 +/- 24.3 Background aperture counts = 180.6 Rate = 0.03 +/- 0.002 [Thu May 9 07:43:08 2013] Updating counts from extracted products [Thu May 9 07:43:08 2013] Set source signif. to 360.41/13.44 = 26.82 [Thu May 9 07:43:09 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 07:43:09 2013] Using photon index=1.80, rate=0.027, arf fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4.arf [Thu May 9 07:43:09 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 07:43:09 2013] Updating source flux to 2.8e-13 [Thu May 9 07:43:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 9 07:43:17 2013] xmm0042340301/analysis//spectral/fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete