[Thu May  9 00:53:20 2013] Detection parameters:
  Position = (227.2, 271.0) = 2 32 37.93 -44 21 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1959.8 +/- 52.5
  Background counts = 10.5
  Rate = 0.2 +/- 0.005

[Thu May  9 00:53:20 2013] Off-axis axis estimate = 5.54'
[Thu May  9 01:33:29 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu May  9 01:33:29 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Thu May  9 01:33:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.951
[Thu May  9 01:33:29 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.20"
[Thu May  9 02:36:15 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May  9 02:36:15 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May  9 02:36:15 2013] Fit fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu May  9 02:36:16 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May  9 02:36:16 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May  9 02:36:16 2013] Fit fullrun_mos1_xmm0042340301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May  9 03:35:15 2013] Spatial fit model total counts = 1843.310000, observed total counts = 1779.000000
[Thu May  9 03:35:15 2013] Offset between fit and detection position for source 1 = 0.127958 pixels
[Thu May  9 03:35:15 2013] 1838.892000 total counts/ 455.592000 bgd. counts: snr = 64.807957
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.127958 pixels
  Position = (227.2, 270.9) = 2 32 37.92 -44 21 49.8
  Extent = 5.2 (4.9-5.6)" x 4.8 (4.5-5.0)", rotation angle = 52 (32-78) degrees
  Source counts = 1383.3 +/- 42.9
  Background counts = 455.6
  Rate = 0.1 +/- 0.003
[Thu May  9 03:35:15 2013] Vigneting correction estimate = 1.000000
[Thu May  9 03:35:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 03:35:15 2013] Assessing source extent using major axis lower bound
[Thu May  9 03:35:15 2013] Source does appear to be extended
[Thu May  9 03:35:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Thu May  9 04:05:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 04:05:49 2013] Initial guess for spatial extent in simple fitting = 5.00"
[Thu May  9 04:05:49 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.102
[Thu May  9 04:05:49 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.00"
[Thu May  9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src2.ximg exists
[Thu May  9 05:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src2.csv
[Thu May  9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May  9 05:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src2.csv
[Thu May  9 05:03:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May  9 05:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May  9 05:03:30 2013] fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May  9 05:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May  9 05:03:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 05:51:31 2013] Warning, spatial fit 2 centroid is now closest to src. 4
[Thu May  9 05:51:31 2013] Vigneting correction estimate = 1.000000
[Thu May  9 05:51:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 05:51:31 2013] Assessing source extent using major axis lower bound
[Thu May  9 05:51:31 2013] Source does appear to be extended
[Thu May  9 05:51:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Thu May  9 06:13:07 2013] Counts = 1383.300000, rescaling region sizes by 2.000000
[Thu May  9 06:13:07 2013] XMMSAS src. selection expression = ellipse(19718.281680, 23518.871200, 629.256018, 570.943216, 52.090015, X, Y)
[Thu May  9 06:13:07 2013] Writing source region out to fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1_src.reg
[Thu May  9 06:13:07 2013] Extracting stamp from image fullrun_mos1_xmm0042340301_pi300-10000_cl_sm2.00.img.gz, (191, 235) - (263, 307)
[Thu May  9 06:13:07 2013] XMMSAS bgd. selection expression = annulus(19718.281680, 23518.871200, 2097.520060, 4195.040121, X, Y) && !ellipse(23845.620400, 24793.020800, 998.080029, 820.624024, 42.216000, X, Y) && !ellipse(23265.548553, 23396.252991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23238.400000, 22634.268000, 1275.456037, 1275.456037, 0.000000, X, Y) && !ellipse(23291.352783, 25853.193207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25687.754000, 23463.794000, 2422.992070, 2422.992070, 0.000000, X, Y) && !ellipse(24436.581085, 22777.535583, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 06:13:07 2013] Writing fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1.gif
[Thu May  9 06:16:29 2013] Mean detx,y = (3559.88, 3039.28) 
[Thu May  9 06:16:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 06:17:15 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 06:17:16 2013] Setting source spectrum file to fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  9 06:17:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  9 07:43:07 2013] Updating aperture counts using extracted products
[Thu May  9 07:43:07 2013] Total counts from fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1695.00
[Thu May  9 07:43:07 2013] Total counts from fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1603.00
[Thu May  9 07:43:07 2013] Got source and background scale factors 1008492.000000, 31693451.000000
[Thu May  9 07:43:07 2013] User source parameters:
  Position = (227.2, 270.9) = 2 32 37.92 -44 21 49.8
  Extent = 5.2 (4.9-5.6)" x 4.8 (4.5-5.0)", rotation angle = 52 (32-78) degrees
  Source aperture counts = 1644.0 +/- 42.2
  Background aperture counts = 51.0
  Rate = 0.1 +/- 0.003

[Thu May  9 07:43:09 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 07:43:09 2013] Using photon index=1.80, rate=0.104, arf fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1.arf
[Thu May  9 07:43:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 07:43:09 2013] Updating source flux to 1.2e-12
[Thu May  9 07:43:17 2013] xmm0042340301/analysis//spectral/fullrun_mos1_xmm0042340301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete