[Sun Jun 10 10:14:14 2012] Detection parameters:
  Position = (334.6, 299.0) = 0 43 18.79 -20 38 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.9 +/- 16.5
  Background counts = 33.1
  Rate = 0.01 +/- 0.002

[Sun Jun 10 10:14:15 2012] Off-axis axis estimate = 2.62'
[Sun Jun 10 10:17:33 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:17:33 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Sun Jun 10 10:17:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Sun Jun 10 10:17:33 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.74"
[Sun Jun 10 11:51:39 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jun 10 11:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src29.csv
[Sun Jun 10 11:51:39 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jun 10 11:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src29.csv
[Sun Jun 10 11:51:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:51:39 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jun 10 11:51:39 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jun 10 11:51:39 2012] Fit fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Jun 10 15:45:47 2012] Spatial fit model total counts = 943.587000, observed total counts = 943.000000
[Sun Jun 10 15:45:47 2012] Offset between fit and detection position for source 29 = 7.011263 pixels
[Sun Jun 10 15:45:47 2012] 934.740000 total counts/ 833.270000 bgd. counts: snr = 3.515157
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.011263 pixels
  Position = (338.0, 292.9) = 0 43 17.76 -20 38 48.8
  Extent = 15.5 (15.4-31.0)", rotation angle = 0
  Source counts = 101.5 +/- 30.6
  Background counts = 833.3
  Rate = 0.01 +/- 0.003
[Sun Jun 10 15:45:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:45:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:45:47 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:45:47 2012] Source does appear to be extended
[Sun Jun 10 15:45:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 15:46:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 15:46:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 15:46:27 2012] Initial guess for spatial extent in simple fitting = 15.48"
[Sun Jun 10 15:46:27 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.971
[Sun Jun 10 15:46:27 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 15.48"
[Sun Jun 10 17:04:24 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun 10 17:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src21.csv
[Sun Jun 10 17:04:24 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun 10 17:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src21.csv
[Sun Jun 10 17:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:04:25 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun 10 17:04:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun 10 17:04:25 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun 10 17:04:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun 10 17:04:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes