[Sun Jun 10 10:14:12 2012] Detection parameters:
  Position = (316.2, 312.0) = 0 43 24.50 -20 37 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1608.6 +/- 49.7
  Background counts = 32.9
  Rate = 0.2 +/- 0.006

[Sun Jun 10 10:14:15 2012] Off-axis axis estimate = 1.62'
[Sun Jun 10 10:17:33 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:17:33 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Jun 10 10:17:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sun Jun 10 10:17:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Jun 10 11:51:38 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 10 11:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src1.csv
[Sun Jun 10 11:51:38 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 10 11:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src1.csv
[Sun Jun 10 11:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:51:39 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 10 11:51:39 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 10 11:51:39 2012] Fit fullrun_pn_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 10 15:45:47 2012] Spatial fit model total counts = 5281.150000, observed total counts = 5258.000000
[Sun Jun 10 15:45:47 2012] Offset between fit and detection position for source 1 = 0.505320 pixels
[Sun Jun 10 15:45:47 2012] 5289.140000 total counts/ 3821.370000 bgd. counts: snr = 23.743704
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.505320 pixels
  Position = (315.9, 312.4) = 0 43 24.60 -20 37 24.1
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 1467.8 +/- 72.7
  Background counts = 3821.4
  Rate = 0.2 +/- 0.008
[Sun Jun 10 15:45:47 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:45:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:45:47 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:45:47 2012] Source does appear to be extended
[Sun Jun 10 15:45:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 15:46:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 15:46:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 15:46:27 2012] Initial guess for spatial extent in simple fitting = 14.48"
[Sun Jun 10 15:46:27 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.955
[Sun Jun 10 15:46:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.48"
[Sun Jun 10 17:04:24 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 10 17:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 17:04:24 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 10 17:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 17:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:04:24 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 10 17:04:24 2012] fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 10 17:04:24 2012] Fit fullrun_pn_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly