[Sun Jun 10 10:15:52 2012] Detection parameters:
  Position = (330.4, 320.9) = 0 43 20.09 -20 36 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.9 +/- 11.9
  Background counts = 15.4
  Rate = 0.005 +/- 0.001

[Sun Jun 10 10:15:53 2012] Off-axis axis estimate = 2.83'
[Sun Jun 10 13:49:35 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 13:49:35 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Sun Jun 10 13:49:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.660
[Sun Jun 10 13:49:35 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.85"
[Sun Jun 10 15:45:31 2012] fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun 10 15:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_src16.csv
[Sun Jun 10 15:45:31 2012] fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun 10 15:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_src16.csv
[Sun Jun 10 15:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 15:45:32 2012] fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun 10 15:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 10 15:45:32 2012] fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun 10 15:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 10 15:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 15:46:10 2012] Spatial fit model total counts = 678.125000, observed total counts = 547.000000
[Sun Jun 10 15:46:10 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 10 15:46:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:10 2012] Assessing source extent using major
[Sun Jun 10 15:46:10 2012] Source does appear to be extended
[Sun Jun 10 15:46:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 18:42:10 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 18:42:10 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Sun Jun 10 18:42:10 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.660
[Sun Jun 10 18:42:10 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.85"