[Sun Jun 10 10:14:55 2012] Detection parameters:
  Position = (308.3, 291.2) = 0 43 26.95 -20 38 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.0 +/- 9.8
  Background counts = 10.1
  Rate = 0.003 +/- 0.0007

[Sun Jun 10 10:14:56 2012] Off-axis axis estimate = 0.89'
[Sun Jun 10 11:51:40 2012] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:51:40 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Sun Jun 10 11:51:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Sun Jun 10 11:51:40 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 6.87"
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src26.ximg exists
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Jun 10 13:49:33 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src26 appears to have run properly
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jun 10 13:49:34 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Jun 10 15:46:00 2012] Spatial fit model total counts = 362.156000, observed total counts = 360.000000
[Sun Jun 10 15:46:00 2012] Offset between fit and detection position for source 34 = 7.709674 pixels
[Sun Jun 10 15:46:00 2012] 395.174100 total counts/ 340.195000 bgd. counts: snr = 2.980806
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 7.709674 pixels
  Position = (302.9, 285.7) = 0 43 28.63 -20 39 20.2
  Extent = 13.7 (13.7-27.5)", rotation angle = 0
  Source counts = 55.0 +/- 19.9
  Background counts = 340.2
  Rate = 0.004 +/- 0.001
[Sun Jun 10 15:46:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:00 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:46:00 2012] Source does appear to be extended
[Sun Jun 10 15:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 17:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:04:25 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Sun Jun 10 17:04:25 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.045
[Sun Jun 10 17:04:25 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.75"
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src23.csv
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src23.csv
[Sun Jun 10 18:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun 10 18:42:10 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly